want to ana;yze the data in MAC layer.

want to ana;yze the data in MAC layer.
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.lans.ethernet  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
want to ana;yze the data in MAC layer. babita.pakanati 01-06-2006
Posted by on January 6, 2006, 12:52 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Hi all

I have some application in which i wanna analyze the data coming to MAC
layer.
In the sence i wanna know how to seperate the date into so many bytes n
how to identify which byte is what???

M using MFC for my gui developement.

Thnx in advance

babi


Pure Networks
Posted by Walter Roberson on January 6, 2006, 3:54 am
If you were  Registered and logged in, you could reply and use other advanced thread options


>I have some application in which i wanna analyze the data coming to MAC
>layer.
>In the sence i wanna know how to seperate the date into so many bytes n
>how to identify which byte is what???

I suggest reading the source for "tcpdump" or "ethereal".

The difficulty of your project depends on which of the several
frame formats you want to support. For an introduction, see
http://en.wikipedia.org/wiki/Ethernet#Ethernet_frame_types_and_the_EtherType_field

Posted by on January 10, 2006, 12:22 am
If you were  Registered and logged in, you could reply and use other advanced thread options


thnx..

Walter Roberson wrote:
> >I have some application in which i wanna analyze the data coming to MAC
> >layer.
> >In the sence i wanna know how to seperate the date into so many bytes n
> >how to identify which byte is what???
>
> I suggest reading the source for "tcpdump" or "ethereal".
>
> The difficulty of your project depends on which of the several
> frame formats you want to support. For an introduction, see
>
http://en.wikipedia.org/wiki/Ethernet#Ethernet_frame_types_and_the_EtherType_field


Similar ThreadsPosted
OSI Model - need the Terms for the Data Units at each Layer February 26, 2005, 2:12 am
data plane June 22, 2007, 12:32 am
Filtering Data base July 8, 2008, 2:47 am
IP layer and layer 2 IGMP Snooping June 7, 2008, 1:28 am
Question about old Decision Data products.... July 12, 2005, 1:17 pm
raw socket receiving junk data. May 21, 2008, 1:32 am
Data width change in opencores Ethernet MAC October 13, 2005, 2:59 am
obtaining port bits per second data from switch August 29, 2006, 12:20 pm
Spring Sale on Data and Voice Equipment March 31, 2007, 9:40 am
Ethernet requirement for Data rate:100 Mbps, Distance:2-3 km September 12, 2005, 5:54 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map