|
Posted by dt1649651@yahoo.com on July 17, 2005, 6:17 am
If you were Registered and logged in, you could reply and use other advanced thread options
My notebook has VPN client 4.6. I 've used it in many place connecting
back to my office 9 using c2811 as VPN terminaltor ) without any
problem . At a specific location ( at a customer house ), I could not
make the connection back to my office , but at the same time I am able
to make the connection to another customer VPN concentrator.
The debug shows :
1861024: *Jul 16 15:06:06.865: ISAKMP:(0:295:HW:2):Total payload
length: 12
1861025: *Jul 16 15:06:06.865: ISAKMP:(0:295:HW:2): sending packet to
69.22.33.131 my_port 500 peer_port 500 (R) AG_INIT_EXCH
1861026: *Jul 16 15:06:06.865: ISAKMP:(0:295:HW:2):Input =
IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY
1861027: *Jul 16 15:06:06.869: ISAKMP:(0:295:HW:2):Old State =
IKE_R_AM_AAA_AWAIT New State = IKE_R_AM2
1861028: *Jul 16 15:06:08.401: ISAKMP:(0:293:HW:2):purging SA.,
sa=474BE944, delme=474BE944
1861029: *Jul 16 15:06:11.901: ISAKMP (0:268435751): received packet
from 69.22.33.131 dport 500 sport 500 Global (R) AG_INIT_EXCH
1861030: *Jul 16 15:06:11.901: ISAKMP:(0:295:HW:2): phase 1 packet is a
duplicate of a previous packet.
1861031: *Jul 16 15:06:11.901: ISAKMP:(0:295:HW:2): retransmitting due
to retransmit phase 1
1861032: *Jul 16 15:06:11.901: ISAKMP:(0:295:HW:2): retransmitting
phase 1 AG_INIT_EXCH...
1861033: *Jul 16 15:06:12.401: ISAKMP:(0:295:HW:2): retransmitting
phase 1 AG_INIT_EXCH...
1861034: *Jul 16 15:06:12.401: ISAKMP:(0:295:HW:2):incrementing error
counter on sa: retransmit phase 1
1861035: *Jul 16 15:06:12.401: ISAKMP:(0:295:HW:2): retransmitting
phase 1 AG_INIT_EXCH
1861036: *Jul 16 15:06:12.401: ISAKMP:(0:295:HW:2): sending packet to
69.22.33.131 my_port 500 peer_port 500 (R) AG_INIT_EXCH
1861037: *Jul 16 15:06:16.901: ISAKMP (0:268435751): received packet
from 69.22.33.131 dport 500 sport 500 Global (R) AG_INIT_EXCH
1861038: *Jul 16 15:
Any advice is appreciated.
DT
|