|
Posted by on July 23, 2005, 9:28 pm
Is it suppose to be outside line? How to configure FXO?
I try config FXS side with extension 20, 21. It seems to be working I
can call between phones that connect to FXS ports. However, I still
having a hard time setting up FXO port.
What we try to accomplish is this
1. normally we dial 9 to access outside line, but we want to dial 8 or
something to access to another router (remote-branch). Are we right
about buying 1 fxo-4 Port for adminsite and 1 fxs-4 Port for remote
site?
2. now we manage to call from remote site to admin. the line is just a
regular exising line from pbx which have extension 12
3. we can't call to 20,21 from Admin Site (because admin site's pbx has
to such extension) but can call between 20 <--> 21 or 20,21 to
12,13,14,15 at Admin Site.
We can also dial 99 to get out from admin site.
here is the sample of admin site's config
!
voice-port 0/0/0
signal ground start
cptone US
! dial-peer voice 1 pots
destination pattern ..
port 0/0/0
!
dial-peer voice 5 voip
destination pattern ..
session target ipv4:10.0.10.2
ip qos dscp cs5 media
!
here is the sample remote site's config
!
voice-port 0/0/0
cptone US
dial-peer voice 1 pots
destination pattern 20
port 0/0/0
!
! dial-peer voice 8 voip
destination pattern ..
session target ipv4:10.0.10.1
ip qos dscp cs5 media
!
are we right that using this command? -> ip qos dscp cs5 media
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map