About the Linksys

About the Linksys "Vonage" 2-port Phone Adapter
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?

Voice Over IP Protocol - VoIP - voice-over-IP Hardware and Standards News and Discussions 

Page 4 of 6       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
About the Linksys "Vonage" 2-port Phone Adapter Ramon F Herrera 07-03-2005
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on July 13, 2005, 9:51 pm
The board is multilayered you would not see the middle layers. U34
apears to be a jumper location without the header. I believe the person
who posted this was already on the service also. Without a dial tone it
may be difficult to produce the same results. Any ideas? Anyone...

/dev/null/ wrote:
> V34 (or U34) looks like a dummy grounding post. Looking at both sides
> of the board, it's not connected to anything.



Posted by on July 13, 2005, 8:14 pm
So, has anyone been able to find the jumpers on the PAP2 board?
Thanks.



Posted by on July 13, 2005, 10:41 pm
It looks like no jumer is really needed any longer. If you simply pick
up the line and wait thru all of the prompts and then the anoying busy
tones, at the end the busy tone will get louder for a few tones and
then silence. Now dial **** after which you will here "Configuration
Menu, bla bla bla" now dial 73738#. This is were I am it asks for a
password?
I have tried the serial # the MAC and a variety of other guesses. I am
thinking about hooking up my laptop and writing a little app. Anyone
have any insight on this password. It's not "ADMIN" either.



Posted by on July 15, 2005, 7:27 am
The jumper would only be needed to do a factory reset if you do not
have the password.
The question is:
Where is the jumper on that board?



Posted by hardly on July 18, 2005, 10:59 pm


haydenisland@gmail.com wrote:
> So, has anyone been able to find the jumpers on the PAP2 board?
> Thanks.


or is this a hoax?



Page 4 of 6       < 1 2 3 > last >>
Similar ThreadsPosted
can I connect Vonage/Linksys PAP2 to home phone wiring? March 15, 2005, 4:24 pm
Which adapter for Vonage? November 16, 2004, 3:24 am
old Vonage Motorola adapter useless? February 11, 2005, 7:13 pm
Vonage adapter with USR 5461 router? February 1, 2006, 6:38 am
Vonage adapter specs wanted March 29, 2007, 11:53 pm
Linksys WRT54GS Router with SPI Stateful Packet Inspection and Vonage December 6, 2005, 8:51 pm
Audio Loss (dropout) occurring with Vonage-using RoadRunner, Linksys, PAP2, etc.. Appreciate ideas? cannot hear me February 10, 2006, 4:05 pm
phone adapter, please help! February 24, 2006, 4:46 pm
Skype / SIP phone adapter suggestions August 29, 2006, 2:56 pm
Better voip phone than the linksys cit200 July 24, 2006, 12:23 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map