|
Posted by /dev/null/ on July 9, 2005, 2:52 am
Where are said jumpers? Looking at pictures posted and mine, there are
no jumpers that I can apparently see.
Sekhar wrote:
> Neither does PAP2 allow you to do a hardware reset through a hidden
> switch accessible to a pencil nor allow you to punch in FACTRESET from
> your telephone pluged into it.
> This is how I did a reset on my PAP2:
> I opened the box to find a two pin jumper for three pins available on
> the board. I kept the device ON, (I used NONSTATIC gloves) pluged off
> the jumper from the second and the third pins and connected it to the
> first and second pins. Then I punched in "****" and "FACTRESET" and
> then "1" on the telephone connected to the PAP2. It announced that it
> did RESET successfully. I then switched of the PAP2 and reverted the
> jumper back to its second and third pin position and closed the box. I
> had the PAP2 unlocked!
>
> Goodluck!
>
> Sekhar.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map
> switch accessible to a pencil nor allow you to punch in FACTRESET from
> your telephone pluged into it.
> This is how I did a reset on my PAP2:
> I opened the box to find a two pin jumper for three pins available on
> the board. I kept the device ON, (I used NONSTATIC gloves) pluged off
> the jumper from the second and the third pins and connected it to the
> first and second pins. Then I punched in "****" and "FACTRESET" and
> then "1" on the telephone connected to the PAP2. It announced that it
> did RESET successfully. I then switched of the PAP2 and reverted the
> jumper back to its second and third pin position and closed the box. I
> had the PAP2 unlocked!
>
> Goodluck!
>
> Sekhar.