|
Posted by John on September 1, 2005, 7:22 pm
If you were Registered and logged in, you could reply and use other advanced thread options
You have no CLID comming up? If a call is ringing a set and you do feature
811 do you see info?
Go into terminal and sets and go to telco features show CLASS ASSIGNMENT
show show line _ _ _ (whatever) caller id set should be yes.
John 807
>
> The company I'm working for had call display working, every set would
> show
> the incoming number. At some point it stopped working, perhaps after a
> power
> failure. Call display is on the line from the telco. It worked before
> so it
> seems to be that I need to turn on the feature through the programming
> except
> the manual is pretty weak at this point - **266344, enter the set
> number which
> is fine but then it reverts to press SHOW, press Next 4 times, press
> SHOW
> without saying what you should see in the menu. I've hunted around
> looking
> for the last item where it says I should see 1stDisplay: but can't find
> it.
>
> Anyone know the menu choices?
>
> Any good pictoral representation around on the net would be another
> question?
>
> Don
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map