sx200 ml/el lw19 q45 question

sx200 ml/el lw19 q45 question
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.telecom.tech  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
sx200 ml/el lw19 q45 question Henry Cabot Henhouse III 07-04-2005
Posted by Henry Cabot Henhouse III on July 4, 2005, 12:55 am
If you were  Registered and logged in, you could reply and use other advanced thread options


I just swapped out the flash card from 19.2 Q21 to 19.3 Q45.

My other 2 SX200 systems LW19.3 Q38 and LW19.3 Q29 both have "Delete the
set" without having to remove each key and the addition of 1NXX (to the
existing 1N0X and 1N1X) screening in ARS.

When I look at form 26 and 9, I don't see 1NXX and I still have to delete
each key before I can delete a set.

The upgrade: (Saved the database first). Powered down node 1, popped out
the flash card, inserted the new one, powered up. Maint screen sez I have
LW19 Q45 Jan 2005.

Do I have to reinitialize the system and reload the saved database? Or as
is typical with Mitel... sprinkle pixie dust on the MCC and chant an ancient
magic Eskimo incantation while twirling on one foot with a torch of fire in
my left hand?

Gratias!
Dave

PS. After asking our "Elite" dealer for a year for a 19.3 upgrade and them
not being able to figure out how to burn a flash card (well, maybe with a
Bic lighter) I just gave up and ordered one from Terry at Dean. I had it in
2 days. Come to think of it, in all of our dealings buying things, Terry as
always been honest and above board. Never a single problem. Thanks Terry. Oh
and I don't work for Dean, I'm just very happy with the service we get. Our
3300 will come from them :) and we're finding a new "Elite" dealer to handle
relicensing and emergencies.






home networking made easy, greater protection, less stress, introducing nm 5.0, 728x90
Posted by on July 4, 2005, 9:08 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Dave, I would want to make *positively sure* (get it in writing) that
those 3300s from the secondary market can be relicensed. Mitel has
recently changed 3300_ICP licensing procedures. What you've been told by
whomever told you, may no longer be fact.

Also you need to be aware that there have been numerous hardware revisions
within that product line (it's literally still evolving) that could make
"used" far less desirable than new. There've been several internal board
revisions. Most importantly, processor speeds, initially 133 Mhz, are
presently running 450 Mhz. Later hard drives are also larger and more
reliable. Based on your past history w/Mitel I would interpret that to
suggest at some point in the not-too-distant future the older slower
processors might get left behind or have upgrade limitations. I would
recommend avoiding 133 Mhz 3300's altogether, even as a gift.

For as long and as hard as you've fought this war with support issues on
your old iron, I would have thought (hoped) by now that you might be ready
to lay down your guns and try the other path. Obviously not.

Chrissakes fella, how much do you *really* think you're going to save
*today* in exchange for the new battles which will surely ensue?



>I just swapped out the flash card from 19.2 Q21 to 19.3 Q45.
>
>My other 2 SX200 systems LW19.3 Q38 and LW19.3 Q29 both have "Delete the
>set" without having to remove each key and the addition of 1NXX (to the
>existing 1N0X and 1N1X) screening in ARS.
>
>When I look at form 26 and 9, I don't see 1NXX and I still have to delete
>each key before I can delete a set.
>
>The upgrade: (Saved the database first). Powered down node 1, popped out
>the flash card, inserted the new one, powered up. Maint screen sez I have
>LW19 Q45 Jan 2005.
>
>Do I have to reinitialize the system and reload the saved database? Or as
>is typical with Mitel... sprinkle pixie dust on the MCC and chant an ancient
>magic Eskimo incantation while twirling on one foot with a torch of fire in
>my left hand?
>
>Gratias!
>Dave
>
>PS. After asking our "Elite" dealer for a year for a 19.3 upgrade and them
>not being able to figure out how to burn a flash card (well, maybe with a
>Bic lighter) I just gave up and ordered one from Terry at Dean. I had it in
>2 days. Come to think of it, in all of our dealings buying things, Terry as
>always been honest and above board. Never a single problem. Thanks Terry. Oh
>and I don't work for Dean, I'm just very happy with the service we get. Our
>3300 will come from them :) and we're finding a new "Elite" dealer to handle
>relicensing and emergencies.
>
>
>



Posted by Henry Cabot Henhouse III on July 6, 2005, 3:25 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Well, I "rtfm" and I did do the upgrade as Mitel sez. But I do not have the
new options.
Is LW19 Q45 considered to be in the LW19.3 family?

Dave


>I just swapped out the flash card from 19.2 Q21 to 19.3 Q45.
>
> My other 2 SX200 systems LW19.3 Q38 and LW19.3 Q29 both have "Delete the
> set" without having to remove each key and the addition of 1NXX (to the
> existing 1N0X and 1N1X) screening in ARS.
>
> When I look at form 26 and 9, I don't see 1NXX and I still have to delete
> each key before I can delete a set.
>
> The upgrade: (Saved the database first). Powered down node 1, popped out
> the flash card, inserted the new one, powered up. Maint screen sez I have
> LW19 Q45 Jan 2005.
>
> Do I have to reinitialize the system and reload the saved database? Or as
> is typical with Mitel... sprinkle pixie dust on the MCC and chant an
> ancient magic Eskimo incantation while twirling on one foot with a torch
> of fire in my left hand?
>
> Gratias!
> Dave
>
> PS. After asking our "Elite" dealer for a year for a 19.3 upgrade and them
> not being able to figure out how to burn a flash card (well, maybe with a
> Bic lighter) I just gave up and ordered one from Terry at Dean. I had it
> in 2 days. Come to think of it, in all of our dealings buying things,
> Terry as always been honest and above board. Never a single problem.
> Thanks Terry. Oh and I don't work for Dean, I'm just very happy with the
> service we get. Our 3300 will come from them :) and we're finding a new
> "Elite" dealer to handle relicensing and emergencies.
>
>
>
>




Posted by Henry Cabot Henhouse III on July 6, 2005, 6:41 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Of course, it's in the feature level.



> Well, I "rtfm" and I did do the upgrade as Mitel sez. But I do not have
> the new options.
> Is LW19 Q45 considered to be in the LW19.3 family?
>
> Dave
>
>
>>I just swapped out the flash card from 19.2 Q21 to 19.3 Q45.
>>
>> My other 2 SX200 systems LW19.3 Q38 and LW19.3 Q29 both have "Delete the
>> set" without having to remove each key and the addition of 1NXX (to the
>> existing 1N0X and 1N1X) screening in ARS.
>>
>> When I look at form 26 and 9, I don't see 1NXX and I still have to delete
>> each key before I can delete a set.
>>
>> The upgrade: (Saved the database first). Powered down node 1, popped
>> out the flash card, inserted the new one, powered up. Maint screen sez I
>> have LW19 Q45 Jan 2005.
>>
>> Do I have to reinitialize the system and reload the saved database? Or
>> as is typical with Mitel... sprinkle pixie dust on the MCC and chant an
>> ancient magic Eskimo incantation while twirling on one foot with a torch
>> of fire in my left hand?
>>
>> Gratias!
>> Dave
>>
>> PS. After asking our "Elite" dealer for a year for a 19.3 upgrade and
>> them not being able to figure out how to burn a flash card (well, maybe
>> with a Bic lighter) I just gave up and ordered one from Terry at Dean. I
>> had it in 2 days. Come to think of it, in all of our dealings buying
>> things, Terry as always been honest and above board. Never a single
>> problem. Thanks Terry. Oh and I don't work for Dean, I'm just very happy
>> with the service we get. Our 3300 will come from them :) and we're
>> finding a new "Elite" dealer to handle relicensing and emergencies.
>>
>>
>>
>>
>
>




Similar ThreadsPosted
sx200 pri question March 18, 2006, 1:19 am
SX200 / 2000 AAN Question July 3, 2006, 6:13 pm
sx200 pri and cim August 25, 2005, 7:43 am
SX2000 to SX200 T1 Tie Line July 10, 2005, 11:55 pm
SX200 2000 Tie Line/Pri September 18, 2006, 3:51 pm
Mitel SX200 and CESID July 1, 2008, 11:51 pm
Mitel SX200 - How to Master Initialize October 16, 2007, 4:16 pm
New CO , Mitel SX200 ground start problems February 20, 2008, 9:01 pm
RTT Question February 21, 2005, 8:18 pm
ASN question... October 10, 2007, 11:51 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map