switch assigning IP

switch assigning IP
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.lans.ethernet  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
switch assigning IP motorpg 04-30-2005
Posted by on April 30, 2005, 8:48 am
If you were  Registered and logged in, you could reply and use other advanced thread options


We have a private network consisting of 10/100 switches that have 1
gigbit input and output. The switches are daisy chained using fiber
connections between switches. For very short distances, the connection
between switches might be copper. The communications will be using IP.

We want to develop an automated method of assigning fixed IP addresses
to nodes on the switches based on their location in the daisy chain.
For example, a node on the second switch would be assigned a
192.168.2.x address. Is there a way of determining the switch location
at startup so an IP address can be assigned in such a way? One thought
was using the TTL in an IP frame similar to what tracert does but I
don't think switches are considered as a hop and so don't decrement the
TTL. This would be done from a master node that is connected to the
first switch via a 1 GB link. Another thought was using a round trip
propagation delay for a packet to determine their distance from the
master node. Is this possible? The thought was that the switch nodes
would come up with a random address and would notify the master node
who then would assign them a new address. We have complete control of
the software running on the switch nodes as far as changing IP
addresses. Any other suggestions are welcome?

Another question I have is what the limitations are on the number of
switches in this daisy chain.



home networking made easy, greater protection, less stress, introducing nm 5.0, 728x90
Posted by Walter Roberson on April 30, 2005, 4:42 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


:We have a private network consisting of 10/100 switches that have 1
:gigbit input and output. The switches are daisy chained using fiber
:connections between switches. For very short distances, the connection
:between switches might be copper. The communications will be using IP.

:We want to develop an automated method of assigning fixed IP addresses
:to nodes on the switches based on their location in the daisy chain.
:For example, a node on the second switch would be assigned a
:192.168.2.x address. Is there a way of determining the switch location
:at startup so an IP address can be assigned in such a way?

You could possibly figure out the switch location by examining
the spanning tree negotiations. The hard part would be in assigning
the IP address based upon that. Most switches don't have that
kind of flexibility, and you can't do it from outside via IP because
the switches don't have an IP until you assign one.


:One thought
:was using the TTL in an IP frame similar to what tracert does but I
:don't think switches are considered as a hop and so don't decrement the
:TTL.

That's correct.

:This would be done from a master node that is connected to the
:first switch via a 1 GB link. Another thought was using a round trip
:propagation delay for a packet to determine their distance from the
:master node. Is this possible? The thought was that the switch nodes
:would come up with a random address and would notify the master node
:who then would assign them a new address. We have complete control of
:the software running on the switch nodes as far as changing IP
:addresses.

Total software control? Ah, you have a chance then. Does the control
extend as far as sending custom packets between the switches?
If not then you might be able to figure something out based upon
the spanning tree results.

:Another question I have is what the limitations are on the number of
:switches in this daisy chain.

Spanning tree is nominally restricted to 7, but that 7 is due to
timing factors that apply less when you have gigabit links, so you
might be able to get away with a longer chain.
--
"Mathematics? I speak it like a native." -- Spike Milligan


Posted by Al Dykes on April 30, 2005, 1:03 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


>:We have a private network consisting of 10/100 switches that have 1
>:gigbit input and output. The switches are daisy chained using fiber
>:connections between switches. For very short distances, the connection
>:between switches might be copper. The communications will be using IP.
>
>:We want to develop an automated method of assigning fixed IP addresses
>:to nodes on the switches based on their location in the daisy chain.
>:For example, a node on the second switch would be assigned a
>:192.168.2.x address. Is there a way of determining the switch location
>:at startup so an IP address can be assigned in such a way?
>
>You could possibly figure out the switch location by examining
>the spanning tree negotiations. The hard part would be in assigning
>the IP address based upon that. Most switches don't have that
>kind of flexibility, and you can't do it from outside via IP because
>the switches don't have an IP until you assign one.
>
>
>:One thought
>:was using the TTL in an IP frame similar to what tracert does but I
>:don't think switches are considered as a hop and so don't decrement the
>:TTL.
>
>That's correct.
>
>:This would be done from a master node that is connected to the
>:first switch via a 1 GB link. Another thought was using a round trip
>:propagation delay for a packet to determine their distance from the
>:master node. Is this possible? The thought was that the switch nodes
>:would come up with a random address and would notify the master node
>:who then would assign them a new address. We have complete control of
>:the software running on the switch nodes as far as changing IP
>:addresses.
>
>Total software control? Ah, you have a chance then. Does the control
>extend as far as sending custom packets between the switches?
>If not then you might be able to figure something out based upon
>the spanning tree results.
>
>:Another question I have is what the limitations are on the number of
>:switches in this daisy chain.
>
>Spanning tree is nominally restricted to 7, but that 7 is due to
>timing factors that apply less when you have gigabit links, so you
>might be able to get away with a longer chain.
>--
> "Mathematics? I speak it like a native." -- Spike Milligan


What problem are you trying to solve with your IP numbering scheme ?





--
a d y k e s @ p a n i x . c o m

Don't blame me. I voted for Gore.


Posted by on May 1, 2005, 1:24 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


So how would one use the spanning tree results. I am not too familiar
with this. Yes we can send custom packets between switches so how would
we use that?


Walter Roberson wrote:
> :We have a private network consisting of 10/100 switches that have 1
> :gigbit input and output. The switches are daisy chained using fiber
> :connections between switches. For very short distances, the
connection
> :between switches might be copper. The communications will be using
IP.
>
> :We want to develop an automated method of assigning fixed IP
addresses
> :to nodes on the switches based on their location in the daisy chain.
> :For example, a node on the second switch would be assigned a
> :192.168.2.x address. Is there a way of determining the switch
location
> :at startup so an IP address can be assigned in such a way?
>
> You could possibly figure out the switch location by examining
> the spanning tree negotiations. The hard part would be in assigning
> the IP address based upon that. Most switches don't have that
> kind of flexibility, and you can't do it from outside via IP because
> the switches don't have an IP until you assign one.
>
>
> :One thought
> :was using the TTL in an IP frame similar to what tracert does but I
> :don't think switches are considered as a hop and so don't decrement
the
> :TTL.
>
> That's correct.
>
> :This would be done from a master node that is connected to the
> :first switch via a 1 GB link. Another thought was using a round trip
> :propagation delay for a packet to determine their distance from the
> :master node. Is this possible? The thought was that the switch nodes
> :would come up with a random address and would notify the master node
> :who then would assign them a new address. We have complete control
of
> :the software running on the switch nodes as far as changing IP
> :addresses.
>
> Total software control? Ah, you have a chance then. Does the control
> extend as far as sending custom packets between the switches?
> If not then you might be able to figure something out based upon
> the spanning tree results.
>
> :Another question I have is what the limitations are on the number of
> :switches in this daisy chain.
>
> Spanning tree is nominally restricted to 7, but that 7 is due to
> timing factors that apply less when you have gigabit links, so you
> might be able to get away with a longer chain.
> --
> "Mathematics? I speak it like a native." -- Spike Milligan



Posted by Walter Roberson on May 1, 2005, 9:27 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


:So how would one use the spanning tree results. I am not too familiar
:with this. Yes we can send custom packets between switches so how would
:we use that?

You must have already come up with some method to figure out that the
first switch in the chain was attached to the controller node,
in order to assign the initial address. So once the first device
has an initial address, it can send out a custom broadcast packet
to the uplink ports; the packet would need to contain little more than
its IP address. When a device in the chain received the packet,
if it already had an IP address, it would drop the packet. If
it did not already have an IP address, it would eat the packet,
assign itself the next sequential IP address, and then send
out its own packet to the uplinks.

This algorithm fails if you have topology branches. If you need
to be able to handle topology branches, then you need to decide
how you want the devices to number themselves in such a case;
then you can probably use a modification of the spanning tree
algorithm to figure out which device is where. For example,
one of the parameters sent with spanning tree is the egress port
number; with that information in hand, you could even do a
left-to-right depth-first threading if that was what you
wanted.

But I would have to agree with the question put by the other
poster: what problem are you trying to solve? To which I would
add, "Wouldn't it be easier to use DHCP?" Do the devices
really have to be numbered in sequential order, or would be
enough to number them in block but in no fixed order within
that block? Is there really any information you gain from
sequential IP addressing that you couldn't better gain through
SNMP?

--
'ignorandus (Latin): "deserving not to be known"'
-- Journal of Self-Referentialism


Similar ThreadsPosted
assigning MAC address to a VLAN March 14, 2008, 4:58 am
HP JetDirect card - assigning a fixed IP July 22, 2007, 3:27 am
Ethernet Braoadband connection to home, assigning static private IP addr? May 21, 2005, 9:14 am
VLAN - switch -> trunk -> switch - priority queuing ? August 19, 2006, 2:31 pm
Switch to switch causing traffic problems? April 19, 2005, 11:46 am
Need Ethernet Hub - NOT Switch March 15, 2005, 7:15 pm
Switch Question July 22, 2005, 7:47 am
Switch Questions August 22, 2005, 9:02 am
Is 100Base-TX switch or hub? November 11, 2005, 6:47 am
Low-end Layer 3 switch? February 14, 2006, 6:19 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map