<?xml version="1.0" encoding="ISO-8859-1"?>
<rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/">
<channel>
<title>comp.dcom.sys.cisco</title>
<link>http://www.telecom-gear.com/comp.dcom.sys.cisco-newsgroup12-1.htm</link>
<description>Cisco Systems - Hardware Software and Security News and Discussions</description>
<language>en-us</language>
<pubDate>Thu, 02 Jul 2009 20:51:00 -0400</pubDate>
<webMaster>info@telecom-gear.com</webMaster>
<generator>http://www.telecom-gear.com/</generator>
<docs>http://blogs.law.harvard.edu/tech/rss/</docs>
<item>
<title>VLAN's -- Which Device?</title>
<link>http://www.telecom-gear.com/VLAN-s-Which-Device-article52997--12.htm</link>
<description>I am looking to implement a couple of VLANs for a test lab I am creating.  Through my travels, I have obtained a Cisco 871 router and a Cisco 2611 rou ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I am looking to implement a couple of VLANs for a test lab I am creating.  Through my travels, I have obtained a Cisco 871 router and a Cisco 2611 router.  As I understand it, both of these devices are capable of implementing VLANs (I have the pr ..]]></content:encoded>
<pubDate>Mon, 13 Apr 2009 22:03:27 -0400</pubDate>
</item>
<item>
<title>Re: Excellent website for CISCO Rotuers</title>
<link>http://www.telecom-gear.com/Re-Excellent-website-for-CISCO-Rotuers-article52990--12.htm</link>
<description>Janelords@hotmail.com writes: igtExcellent website for CISCO Rotuers including pictures of various/i igtrouter models all in one place./i  Isnt an eve ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Janelords@hotmail.com writes: igtExcellent website for CISCO Rotuers including pictures of various/i igtrouter models all in one place./i  Isnt an even better one at http://www.cisco.com/         ]]></content:encoded>
<pubDate>Mon, 13 Apr 2009 11:26:19 -0400</pubDate>
</item>
<item>
<title>Will Cisco routers help my VoIP issue...</title>
<link>http://www.telecom-gear.com/Will-Cisco-routers-help-my-VoIP-issue-article52989--12.htm</link>
<description>Hi,  What I have is two office phone systems (2 locations) and 5 IP phones.  The  two office systems communicate with each other over IP and so do the ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  What I have is two office phone systems (2 locations) and 5 IP phones.  The  two office systems communicate with each other over IP and so do the 5 IP  phones.  We have a T1 at each office.  The 5 IP phones are at branch offices  that have DSL.  ..]]></content:encoded>
<pubDate>Mon, 13 Apr 2009 10:51:46 -0400</pubDate>
</item>
<item>
<title>Which router do we need?</title>
<link>http://www.telecom-gear.com/Which-router-do-we-need-article52988--12.htm</link>
<description>We have just upgraded to a Metro Ethernet internet connection. Our ISP has loaned us a Cisco 1841 router for a month. After that we either have to buy ..... The post has 3 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[We have just upgraded to a Metro Ethernet internet connection. Our ISP has loaned us a Cisco 1841 router for a month. After that we either have to buy a router or pay rental.  Now, one potential vendor has suggested that a Cisco 1811 would be the bes ..]]></content:encoded>
<pubDate>Mon, 13 Apr 2009 10:25:42 -0400</pubDate>
</item>
<item>
<title>IP Pool Assignment</title>
<link>http://www.telecom-gear.com/IP-Pool-Assignment-article52985--12.htm</link>
<description>Dear Moderators / Members  I am not aware whether the question I am asking relates to this forum or not.  I am working in a Consumer goods production  ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Dear Moderators / Members  I am not aware whether the question I am asking relates to this forum or not.  I am working in a Consumer goods production industry where IT is a small department. Here we have Cisco 2811 router and Cisco ASA Firewall and C ..]]></content:encoded>
<pubDate>Mon, 13 Apr 2009 09:06:21 -0400</pubDate>
</item>
<item>
<title>Spercified network name is no longer available.... ..</title>
<link>http://www.telecom-gear.com/Spercified-network-name-is-no-longer-available-article52975--12.htm</link>
<description>We have a windows XP PC, on a private vlan, gig link, behind a PAT NAT.  This machine is copying data to and from a cifs server volume that is off cam ..... The post has 7 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[We have a windows XP PC, on a private vlan, gig link, behind a PAT NAT.  This machine is copying data to and from a cifs server volume that is off campus.  The copy will take about 2 hours, as calculated by the windows progress bar.  The copy will st ..]]></content:encoded>
<pubDate>Sun, 12 Apr 2009 17:10:25 -0400</pubDate>
</item>
<item>
<title>Cisco 2948G-L3</title>
<link>http://www.telecom-gear.com/Cisco-2948G-L3-article52974--12.htm</link>
<description>Hy Leute,  Ich hab ein Problem und zwar hab ich einen Cisco 2948GL3 Switch ohne image file im Bootflash, aber leider gibts das file nicht mehr auf der ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hy Leute,  Ich hab ein Problem und zwar hab ich einen Cisco 2948GL3 Switch ohne image file im Bootflash, aber leider gibts das file nicht mehr auf der Cisco Seite zum Downloaden  Hat vielleicht wer so einen switch oder kann mir wer das imagefile zu ..]]></content:encoded>
<pubDate>Sun, 12 Apr 2009 16:48:45 -0400</pubDate>
</item>
<item>
<title>REQ: Cisco VxWorks Image AP1200v1203T</title>
<link>http://www.telecom-gear.com/REQ-Cisco-VxWorks-Image-AP1200v1203T-article52973--12.htm</link>
<description>wre jemand so net mir das vxworks image hochzuladen. auf der ciscowebsite  ist es leider nicht mehr herunterladbar.  die neueren versionen helfen mir  ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[wre jemand so net mir das vxworks image hochzuladen. auf der ciscowebsite  ist es leider nicht mehr herunterladbar.  die neueren versionen helfen mir leider nicht weiter, abwrts bis 11.57 wre  ok.   TIA    ]]></content:encoded>
<pubDate>Sun, 12 Apr 2009 14:34:33 -0400</pubDate>
</item>
<item>
<title>This is a brand new Abercrombie &amp; (www.trade8.cc)</title>
<link>http://www.telecom-gear.com/This-is-a-brand-new-Abercrombie-www-trade8-cc-article52970--12.htm</link>
<description>China quality 10 deep hoody catalog and quality 10 deep hoody manufacturer directory. Trade platform for China quality 10 deep hoody manufacturers and ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[China quality 10 deep hoody catalog and quality 10 deep hoody manufacturer directory. Trade platform for China quality 10 deep hoody manufacturers and ... abercrombie amp fitch hoody,abercrombie amp fitch wholesaler,cheap abercrombie amp fitch, ..]]></content:encoded>
<pubDate>Sat, 11 Apr 2009 03:27:18 -0400</pubDate>
</item>
<item>
<title>Quad DSL</title>
<link>http://www.telecom-gear.com/Quad-DSL-article52965--12.htm</link>
<description>I would like to use a Cisco 2800 router with 4 x ADSL cards to load  share traffic to the Internet. The inside LAN would be a single /24 and  the rout ..... The post has 6 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I would like to use a Cisco 2800 router with 4 x ADSL cards to load  share traffic to the Internet. The inside LAN would be a single /24 and  the router the default gateway.  Assuming I have 4 x circuits (4 x separate public IPs), am I right in  as ..]]></content:encoded>
<pubDate>Fri, 10 Apr 2009 18:56:41 -0400</pubDate>
</item>
<item>
<title>NAT Solution</title>
<link>http://www.telecom-gear.com/NAT-Solution-article52963--12.htm</link>
<description>Were needing to implement a solution whereby we can reroute traffic based on source address to a different resource. Basically, the default behavior w ..... The post has 3 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Were needing to implement a solution whereby we can reroute traffic based on source address to a different resource. Basically, the default behavior would let the packet route to the normal destination, but anyone configured in a list would be shun ..]]></content:encoded>
<pubDate>Fri, 10 Apr 2009 10:50:01 -0400</pubDate>
</item>
<item>
<title>site-2-site VPN</title>
<link>http://www.telecom-gear.com/site-2-site-VPN-article52958--12.htm</link>
<description>Hi everybody,  I was asking about the S2S VPN lately, but have a bit different question  now. What are the industry standards / best practices to secu ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi everybody,  I was asking about the S2S VPN lately, but have a bit different question  now. What are the industry standards / best practices to securely  connect two company branches I was thinking of a VPN connection, but it  does not allow one t ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 18:49:41 -0400</pubDate>
</item>
<item>
<title>What Model Do I Need</title>
<link>http://www.telecom-gear.com/What-Model-Do-I-Need-article52953--12.htm</link>
<description>At our headquarters, we are putting in a dedicated network that will have 2  separate WAN circuits.  One of the WAN circuits will serve as a private v ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[At our headquarters, we are putting in a dedicated network that will have 2  separate WAN circuits.  One of the WAN circuits will serve as a private vpn  to remote offices, the other will provide access to the public Internet.  All remote offices wil ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 16:20:53 -0400</pubDate>
</item>
<item>
<title>Cable Tracing</title>
<link>http://www.telecom-gear.com/Cable-Tracing-article52950--12.htm</link>
<description>I have inherited a lan closet that we share with another group that has their own 4506.  Needless to say it is a huge furball, and nothing is labeled, ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have inherited a lan closet that we share with another group that has their own 4506.  Needless to say it is a huge furball, and nothing is labeled, on either ours or their switch.  Is there some easy way or tool to trace a patch cable from the swi ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 14:11:39 -0400</pubDate>
</item>
<item>
<title>How do I disable xremote (tcp/9001)</title>
<link>http://www.telecom-gear.com/How-do-I-disable-xremote-tcp-9001-article52948--12.htm</link>
<description>I am stumped on how to disable xremote in ISO. I have a PCI Approved Scanning Vendor classifying the port as an unencrypted management port which is a ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[I am stumped on how to disable xremote in ISO. I have a PCI Approved Scanning Vendor classifying the port as an unencrypted management port which is a violation of PCI DSS 1.2. I could put an ACL in place to drop the traffic, but it seems like the ri ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 12:57:25 -0400</pubDate>
</item>
<item>
<title>Problem with uploading edited config</title>
<link>http://www.telecom-gear.com/Problem-with-uploading-edited-config-article52946--12.htm</link>
<description>Hello everyone your help with this issue would be greatly appreciated. I am using an edited configuration that I pulled from another ASA5520 and when  ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hello everyone your help with this issue would be greatly appreciated. I am using an edited configuration that I pulled from another ASA5520 and when I upload it via TFTP no matter if I use Solarwinds Cisco Config viewer to edit or Wordpad to edit it ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 11:23:21 -0400</pubDate>
</item>
<item>
<title>How to do NAT OUT-to-OUT to minimize downtime</title>
<link>http://www.telecom-gear.com/How-to-do-NAT-OUT-to-OUT-to-minimize-downtime-article52945--12.htm</link>
<description>    Hello I have this problem:  C1721 with 12.4(21) ADVSEC Atm0.1 pointtopoint loopback0 1.1.1.2/29 (public wan IP) on this interface I make NAT eth0  ..... The post has 5 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[    Hello I have this problem:  C1721 with 12.4(21) ADVSEC Atm0.1 pointtopoint loopback0 1.1.1.2/29 (public wan IP) on this interface I make NAT eth0 LAN 172.16.0.0/27  Actually I have a mail server on the lan on 172.16.0.4  I have one static  nat ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 11:18:53 -0400</pubDate>
</item>
<item>
<title>##Cisco CCNA/CCNP Tutor Services## $4.99</title>
<link>http://www.telecom-gear.com/Cisco-CCNA-CCNP-Tutor-Services-4-99-article52939--12.htm</link>
<description>lthtmlgt ltbodygt     ilth2gtltfont color  quotredquotgtCisco CCNA/CCNP Tutorial Serviceslt//i fontgtlt/h2gt ilth3gtTrying to calculate those IP Addre ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[lthtmlgt ltbodygt     ilth2gtltfont color  quotredquotgtCisco CCNA/CCNP Tutorial Serviceslt//i fontgtlt/h2gt ilth3gtTrying to calculate those IP Addressing, Host/SubnetMask Problems/i lt/h3gt ilt ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 04:24:36 -0400</pubDate>
</item>
<item>
<title>cisco 827-4v,  station-id name</title>
<link>http://www.telecom-gear.com/cisco-827-4v-station-id-name-article52938--12.htm</link>
<description>Hello  Could you tell me why I cant see  name from stationid name  on voice port  I configured:   stationid name Test  stationid number 2222   The I d ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hello  Could you tell me why I cant see  name from stationid name  on voice port  I configured:   stationid name Test  stationid number 2222   The I do call from 8274V to 3845 which is connected over ISDN PRI to Avaya Definity, But I see onl ..]]></content:encoded>
<pubDate>Thu, 09 Apr 2009 03:19:43 -0400</pubDate>
</item>
<item>
<title>Site to Site VPN - I am lost</title>
<link>http://www.telecom-gear.com/Site-to-Site-VPN-I-am-lost-article52932--12.htm</link>
<description>Hi guys,  I am totally confused with the Site to Site VPN configuration. Assume  there are two different companies X and Y. There is a FTP server (ser ..... The post has 7 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi guys,  I am totally confused with the Site to Site VPN configuration. Assume  there are two different companies X and Y. There is a FTP server (server  B) in network 10.20.20.0/16 which belongs to company Y. There is also a  FTP client (server A)  ..]]></content:encoded>
<pubDate>Wed, 08 Apr 2009 18:20:52 -0400</pubDate>
</item>
<item>
<title>Block by country</title>
<link>http://www.telecom-gear.com/Block-by-country-article52924--12.htm</link>
<description>I have a Cisco 871 router with IOS 12.4 installed.  Im using SDM 2.5 to  do most of my configuration.  I want to set up the firewall capability  to bl ..... The post has 6 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have a Cisco 871 router with IOS 12.4 installed.  Im using SDM 2.5 to  do most of my configuration.  I want to set up the firewall capability  to block incoming connections to my website from anywhere other than the  United States.  Does anyone k ..]]></content:encoded>
<pubDate>Wed, 08 Apr 2009 12:57:39 -0400</pubDate>
</item>
<item>
<title>Cisco CMTS</title>
<link>http://www.telecom-gear.com/Cisco-CMTS-article52921--12.htm</link>
<description>We currently have a legacy (Nortel) CMTS in production (less than 1000  customers) and are looking to upgrade the CMTS.  I wanted to know if  there is ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[We currently have a legacy (Nortel) CMTS in production (less than 1000  customers) and are looking to upgrade the CMTS.  I wanted to know if  there is anyone using a Cisco solution for cable modems  We were  recommended a  Cisco 7246VXR Universal Br ..]]></content:encoded>
<pubDate>Wed, 08 Apr 2009 10:53:52 -0400</pubDate>
</item>
<item>
<title>understanding Access list information</title>
<link>http://www.telecom-gear.com/understanding-Access-list-information-article52918--12.htm</link>
<description>Can anyone provide me with information as to what the below information means  Standard IP access list 1     10 permit 172.0.0.0, wildcard bits 0.255. ..... The post has 3 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Can anyone provide me with information as to what the below information means  Standard IP access list 1     10 permit 172.0.0.0, wildcard bits 0.255.255.255 (23814 matches) Extended IP access list 105     10 permit ip any host 204.8.194.249 (1092026 ..]]></content:encoded>
<pubDate>Wed, 08 Apr 2009 09:17:12 -0400</pubDate>
</item>
<item>
<title>Upgrading a WS-X4232-L3 card</title>
<link>http://www.telecom-gear.com/Upgrading-a-WS-X4232-L3-card-article52913--12.htm</link>
<description>Hi,  Ive got hold of a WSC4006 chassis with Sup II and WSX4232L3 routing card. Ive managed to upgrade the Sup II easily enough, but I cant seem to fin ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  Ive got hold of a WSC4006 chassis with Sup II and WSX4232L3 routing card. Ive managed to upgrade the Sup II easily enough, but I cant seem to find where to get a newer IOS image for the X4232L3. Its not easily found on Cisco.com  Co ..]]></content:encoded>
<pubDate>Tue, 07 Apr 2009 13:17:49 -0400</pubDate>
</item>
<item>
<title>IOS 12.3(2)T  837</title>
<link>http://www.telecom-gear.com/IOS-12-3-2-T-837-article52908--12.htm</link>
<description>Could someone tell me how much memory is required to run IOS 12.3(2)T on a Cisco 837.  I only have guest access to Cisco.  Apparently, Cisco stopped i ..... The post has 5 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Could someone tell me how much memory is required to run IOS 12.3(2)T on a Cisco 837.  I only have guest access to Cisco.  Apparently, Cisco stopped including memory requirement on their release notes at some stage. They say to use the configuration  ..]]></content:encoded>
<pubDate>Tue, 07 Apr 2009 10:13:42 -0400</pubDate>
</item>
<item>
<title>IP NAT/PAT</title>
<link>http://www.telecom-gear.com/IP-NAT-PAT-article52907--12.htm</link>
<description>Hi Guys,  Just a quick Questions. I want to setup NAT/PAT Translation details are below...  SERVER          ltlt        NAT ROUTER ltlt WAN 192.168.0. ..... The post has 4 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi Guys,  Just a quick Questions. I want to setup NAT/PAT Translation details are below...  SERVER          ltlt        NAT ROUTER ltlt WAN 192.168.0.0 /24ltlt         192.168.0.0/24   | 172.17.0.0 / 16        ltlt WAN   I want a WAN  ..]]></content:encoded>
<pubDate>Tue, 07 Apr 2009 09:32:04 -0400</pubDate>
</item>
<item>
<title>Unapproved GBIC</title>
<link>http://www.telecom-gear.com/Unapproved-GBIC-article52904--12.htm</link>
<description>Hi all, we are quite custom to using noncisco branded SFPs and GBICs in our switches, I use the commands:  service unsupportedtransceiver no errdisabl ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi all, we are quite custom to using noncisco branded SFPs and GBICs in our switches, I use the commands:  service unsupportedtransceiver no errdisable detect cause gbicinvalid errdisable recovery cause gbicinvalid  which allows the optics to ..]]></content:encoded>
<pubDate>Mon, 06 Apr 2009 21:31:24 -0400</pubDate>
</item>
<item>
<title>l2tp udp checksums in 12.4T</title>
<link>http://www.telecom-gear.com/l2tp-udp-checksums-in-12-4T-article52902--12.htm</link>
<description> Ok, this is a weird one.  I noticed that a vpdn configuration that I have used since 12.2 was not doing what I expected in 12.4(15)T.  In particular, ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[ Ok, this is a weird one.  I noticed that a vpdn configuration that I have used since 12.2 was not doing what I expected in 12.4(15)T.  In particular, udp checksums were not on even though the vpdn group specified quotl2tp ip udp checksumquot.  A ..]]></content:encoded>
<pubDate>Mon, 06 Apr 2009 17:35:27 -0400</pubDate>
</item>
<item>
<title>Switch errors in Kiwi CatTools</title>
<link>http://www.telecom-gear.com/Switch-errors-in-Kiwi-CatTools-article52901--12.htm</link>
<description>Ive just started using Kiwi CatTools to monitor our switches. When viewing  the built in Error report for our 3750 amp 3550s there are a lot of column ..... The post has 3 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Ive just started using Kiwi CatTools to monitor our switches. When viewing  the built in Error report for our 3750 amp 3550s there are a lot of columns  of which Im unsure of the meaning i.e. Watchdog, Align errors, Output  buffer failures, etc ..]]></content:encoded>
<pubDate>Mon, 06 Apr 2009 10:21:00 -0400</pubDate>
</item>
<item>
<title>Re: Importing full/inactive IPv4 global table in t ..</title>
<link>http://www.telecom-gear.com/Re-Importing-full-inactive-IPv4-global-table-in-to-VRF-article52895--12.htm</link>
<description>Hi,      Due to some specific reasons, Im trying to import the full BGP routes from a single service provider A into a dedicated VRF of a customer (do ..... The post has 4 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,      Due to some specific reasons, Im trying to import the full BGP routes from a single service provider A into a dedicated VRF of a customer (downstream BGP customer). Yes i know that importing full IPv4 global table into VRF is not scalable  ..]]></content:encoded>
<pubDate>Sat, 04 Apr 2009 11:29:04 -0400</pubDate>
</item>
<item>
<title>strange cisco 7604 password recovery problem</title>
<link>http://www.telecom-gear.com/strange-cisco-7604-password-recovery-problem-article52893--12.htm</link>
<description>Hi We have in our lab a cisco 7604 and I cant remember its enable password.  I tried standard password recovery procedure (reboot, confreg 0x2142  res ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi We have in our lab a cisco 7604 and I cant remember its enable password.  I tried standard password recovery procedure (reboot, confreg 0x2142  reset) but for some reason this box allways loads configuration (it  canges configuration register t ..]]></content:encoded>
<pubDate>Fri, 03 Apr 2009 17:05:18 -0400</pubDate>
</item>
<item>
<title>VPN client disconnects</title>
<link>http://www.telecom-gear.com/VPN-client-disconnects-article52884--12.htm</link>
<description>I have an odd problem with a couple of my users. I have been working with one that works from an office in our County Courthouse and chalked up the pr ..... The post has 8 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have an odd problem with a couple of my users. I have been working with one that works from an office in our County Courthouse and chalked up the problems to getting off their network. But last night my boss started having the same problems and I h ..]]></content:encoded>
<pubDate>Fri, 03 Apr 2009 09:27:24 -0400</pubDate>
</item>
<item>
<title>Nipper and Cisco Security Audit</title>
<link>http://www.telecom-gear.com/Nipper-and-Cisco-Security-Audit-article52882--12.htm</link>
<description>I am using Nipper for verifying my Cisco configuration.  Nipper is finding the quotrloginquot service that is not in the configuration.  I have search ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[I am using Nipper for verifying my Cisco configuration.  Nipper is finding the quotrloginquot service that is not in the configuration.  I have searched the access lists and do not see it anywhere.  The explanation by Nipper about this finding,  ..]]></content:encoded>
<pubDate>Thu, 02 Apr 2009 18:36:55 -0400</pubDate>
</item>
<item>
<title>Cisco 1800: How can I tell how much Bandwidth I am ..</title>
<link>http://www.telecom-gear.com/Cisco-1800-How-can-I-tell-how-much-Bandwidth-I-am-using-vs-article52878--12.htm</link>
<description> I a a newb at Cisco.  But what we are seeing lately is a drop off of our bandwidth availability to /from the Internet.  Weve basically got a T1 set u ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[ I a a newb at Cisco.  But what we are seeing lately is a drop off of our bandwidth availability to /from the Internet.  Weve basically got a T1 set up.  What I am trying to find out is the best Monitor I can use through SDM to find out what is goi ..]]></content:encoded>
<pubDate>Thu, 02 Apr 2009 12:33:48 -0400</pubDate>
</item>
<item>
<title>Cisco LocalDirector Help...</title>
<link>http://www.telecom-gear.com/Cisco-LocalDirector-Help-article52875--12.htm</link>
<description>Hi All,  I have recently inherited a Cisco LocalDirector 417 and need to perform the password reset procedure. I have unlock3002.bin, but will also ne ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi All,  I have recently inherited a Cisco LocalDirector 417 and need to perform the password reset procedure. I have unlock3002.bin, but will also need a recent OS image. I have a Cisco account, but all downloads have been removed for this product a ..]]></content:encoded>
<pubDate>Thu, 02 Apr 2009 08:46:05 -0400</pubDate>
</item>
<item>
<title>837 IOS Upgrade</title>
<link>http://www.telecom-gear.com/837-IOS-Upgrade-article52874--12.htm</link>
<description>I am new to Cisco routers. I just bought a used 837,  managed to configure it and it is working fine. Its IOS is an older version and wont work with t ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I am new to Cisco routers. I just bought a used 837,  managed to configure it and it is working fine. Its IOS is an older version and wont work with the latest SDM.  Is there a version of SDM which will work with my 837s IOS version  Or maybe I sh ..]]></content:encoded>
<pubDate>Thu, 02 Apr 2009 06:43:33 -0400</pubDate>
</item>
<item>
<title>Question on VPN Termination on C871</title>
<link>http://www.telecom-gear.com/Question-on-VPN-Termination-on-C871-article52872--12.htm</link>
<description>Hi there,  is it possible to setup a VPN server on a C871 box which runs on a DSL Line  which is using dynamic IPs Or is it essential to use a static  ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi there,  is it possible to setup a VPN server on a C871 box which runs on a DSL Line  which is using dynamic IPs Or is it essential to use a static IP for that  case I did not find anything on Ciscos Documentation on this. All documentation  talk ..]]></content:encoded>
<pubDate>Thu, 02 Apr 2009 05:33:57 -0400</pubDate>
</item>
<item>
<title>Question on throughput</title>
<link>http://www.telecom-gear.com/Question-on-throughput-article52867--12.htm</link>
<description>I was trying out the ttcp command to get throughput numbers (Ive just now found out about it...). I probably should know this, but its been a while si ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I was trying out the ttcp command to get throughput numbers (Ive just now found out about it...). I probably should know this, but its been a while since Ive read anything about throughput  what is an acceptable value for throughput For exam ..]]></content:encoded>
<pubDate>Wed, 01 Apr 2009 16:19:54 -0400</pubDate>
</item>
<item>
<title>Cisco VPN Client - client-LAN access for headquart ..</title>
<link>http://www.telecom-gear.com/Cisco-VPN-Client-client-LAN-access-for-headquarter-article52860--12.htm</link>
<description>Hello everybody,  I understand that the VPN ClientB4s quotlocal LAN accessquot feature enables the Client to also access ressources in itB4s own LAN   ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hello everybody,  I understand that the VPN ClientB4s quotlocal LAN accessquot feature enables the Client to also access ressources in itB4s own LAN  which works fine in my setup. Having the feature activated I can see my local LAN routes and  ..]]></content:encoded>
<pubDate>Wed, 01 Apr 2009 05:19:10 -0400</pubDate>
</item>
<item>
<title>question for static route -- default route</title>
<link>http://www.telecom-gear.com/question-for-static-route-default-route-article52859--12.htm</link>
<description>Hi,  My partial network configuration:  A Cisco Router has two Ethernet interfaces, thses interfaces are connecting to two differnet VLAN ( data VLAN  ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  My partial network configuration:  A Cisco Router has two Ethernet interfaces, thses interfaces are connecting to two differnet VLAN ( data VLAN is 192.168.101.0/24 while voice VLAN is 10.10.10.0/24 ) ports of a Cat3560 PoE switch. the Cat3560 a ..]]></content:encoded>
<pubDate>Wed, 01 Apr 2009 00:04:05 -0400</pubDate>
</item>
<item>
<title>question for static route -- default route</title>
<link>http://www.telecom-gear.com/question-for-static-route-default-route-article52858--12.htm</link>
<description>Hi,  My partial network configuration:  A Cisco Router has two Ethernet interfaces, thses interfaces are connecting to two differnet VLAN ( data VLAN  ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  My partial network configuration:  A Cisco Router has two Ethernet interfaces, thses interfaces are connecting to two differnet VLAN ( data VLAN is 192.168.101.0/24 while voice VLAN is 10.10.10.0/24 ) ports of a Cat3560 PoE switch. the Cat3560 a ..]]></content:encoded>
<pubDate>Wed, 01 Apr 2009 00:03:14 -0400</pubDate>
</item>
<item>
<title>Free root access on a server to test/learn network ..</title>
<link>http://www.telecom-gear.com/Free-root-access-on-a-server-to-test-learn-networking-article52855--12.htm</link>
<description>Hi,  Comfort and Peace, I wish you  Here is a free access....  telnet to 98.215.91.249 on port 2033   About breaking something, do not worry.   userna ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  Comfort and Peace, I wish you  Here is a free access....  telnet to 98.215.91.249 on port 2033   About breaking something, do not worry.   username: root   password:   (just hit quotenterquot)   To you, I decided to provide root access. Root ..]]></content:encoded>
<pubDate>Tue, 31 Mar 2009 21:05:51 -0400</pubDate>
</item>
<item>
<title>IOS NAT</title>
<link>http://www.telecom-gear.com/IOS-NAT-article52853--12.htm</link>
<description>I need to NAT a range of ports from a public IP to a private IP.  I  typically use the form:  ip nat inside source static tcp i1.i2.i3.i4 22 p1.p2.p3. ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I need to NAT a range of ports from a public IP to a private IP.  I  typically use the form:  ip nat inside source static tcp i1.i2.i3.i4 22 p1.p2.p3.p4 22 extendable   I could make quite a few of these statements and have it work, but I want to  spe ..]]></content:encoded>
<pubDate>Tue, 31 Mar 2009 14:12:45 -0400</pubDate>
</item>
<item>
<title>ASA 525, Cisco 3960 switch</title>
<link>http://www.telecom-gear.com/ASA-525-Cisco-3960-switch-article52837--12.htm</link>
<description>Hello,  I have a Cisco ASA 525 as my firewall, on my switch I have 3 vlans. this weekend my data center made some switch upgrades and after that we ar ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hello,  I have a Cisco ASA 525 as my firewall, on my switch I have 3 vlans. this weekend my data center made some switch upgrades and after that we are having serious issues, i have two boxes same vlan, same network settings etc, one can get to the w ..]]></content:encoded>
<pubDate>Mon, 30 Mar 2009 11:49:34 -0400</pubDate>
</item>
<item>
<title>Cisco ASA 5510 WebVPN SSL</title>
<link>http://www.telecom-gear.com/Cisco-ASA-5510-WebVPN-SSL-article52836--12.htm</link>
<description>I have a Cisco ASA 5510 with WebVPN running.  The user connects with name and password and it downloads the WebVPN SSL client. (we do not used the ful ..... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have a Cisco ASA 5510 with WebVPN running.  The user connects with name and password and it downloads the WebVPN SSL client. (we do not used the full VPN Client as the webvpn allows connection from any PC without any client configuration).  Well no ..]]></content:encoded>
<pubDate>Mon, 30 Mar 2009 10:01:26 -0400</pubDate>
</item>
<item>
<title>Limit In &amp; Out Bandwitch on a port of Cisco 3550 I ..</title>
<link>http://www.telecom-gear.com/Limit-In-Out-Bandwitch-on-a-port-of-Cisco-3550-IOS-article52831--12.htm</link>
<description>Hi   I am search a solution for limit the bandwitch of one cisco Fe port on a Catalyst 3550 :  I have a server connected at 100 Mbits on this port. I  ..... The post has 6 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi   I am search a solution for limit the bandwitch of one cisco Fe port on a Catalyst 3550 :  I have a server connected at 100 Mbits on this port. I want limit the bandwitch at 10 Mbits In and 10 Mbits Out  if the server use gt 10 Mbits gt use  ..]]></content:encoded>
<pubDate>Mon, 30 Mar 2009 07:44:48 -0400</pubDate>
</item>
<item>
<title>FIOS Connectivity</title>
<link>http://www.telecom-gear.com/FIOS-Connectivity-article52829--12.htm</link>
<description>Greetings,  I have acquired a cisco 3660 that I am trying to configure at home and move into a small business environment.  I have verizon fios at hom ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Greetings,  I have acquired a cisco 3660 that I am trying to configure at home and move into a small business environment.  I have verizon fios at home with a wireless router.  However, my business place has a verizon DSL.  My goal is to configure al ..]]></content:encoded>
<pubDate>Sun, 29 Mar 2009 19:00:45 -0400</pubDate>
</item>
<item>
<title>Cisco 1841 DSL woe's - what does this 'debug atm e ..</title>
<link>http://www.telecom-gear.com/Cisco-1841-DSL-woe-s-what-does-this-debug-atm-events-out-article52828--12.htm</link>
<description>The DSL is not seeing showtime from the ISP  is this simply that it cannot see the ISPs signal or could it be that the telephone line quality is too b ..The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[The DSL is not seeing showtime from the ISP  is this simply that it cannot see the ISPs signal or could it be that the telephone line quality is too bad (there is a very long telephone extension on the line, sound is crackly)  I ask this beca ..]]></content:encoded>
<pubDate>Sun, 29 Mar 2009 17:58:27 -0400</pubDate>
</item>
<item>
<title>permit same-security-traffic</title>
<link>http://www.telecom-gear.com/permit-same-security-traffic-article52820--12.htm</link>
<description>I have found on the internet an article which describes how to enable  traffic to enter and exit the same interface. The command is  hostname(config)  ..... The post has 11 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have found on the internet an article which describes how to enable  traffic to enter and exit the same interface. The command is  hostname(config) samesecuritytraffic permit intrainterface  I have four follow up questions: 1. Why is this disab ..]]></content:encoded>
<pubDate>Sun, 29 Mar 2009 14:21:37 -0400</pubDate>
</item>
<item>
<title>Cisco ASA - interface names</title>
<link>http://www.telecom-gear.com/Cisco-ASA-interface-names-article52821--12.htm</link>
<description>Perhaps a dumb question, but I need clarification on it.  Many times on the Internet you can find articles describing different  configurations (VPN,  ..... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Perhaps a dumb question, but I need clarification on it.  Many times on the Internet you can find articles describing different  configurations (VPN, access lists etc.) where they refer to the  interface as quotoutsidequot or quotinsidequot ( ..]]></content:encoded>
<pubDate>Sun, 29 Mar 2009 14:17:55 -0400</pubDate>
</item>
</channel>
</rss>