|
Posted by tg on May 15, 2008, 7:39 am
If you were Registered and logged in, you could reply and use other advanced thread options
trying to configure a Cisco 340 access point as a repeater, I've been
going through the instructions here:
http://www.cisco.com/en/US/docs/wireless/access_point/350/configuration/guide/ap35ch12.html
everything seems to go okay until I get to step 19 where it says:
'Step 19 On the Express Setup page, select Repeater Access Point as
the Role in Radio Network.'
but on my Express setup page there is no option for Repeater Access
Point, there is only one option called Site Survey Client, and
nothing else. Thanks for any pointers.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map