|
Posted by Sam on April 28, 2008, 5:44 pm
If you were Registered and logged in, you could reply and use other advanced thread options >
>
>
>
>
> > Sam,
>
> > While you are in ROMMONITOR, do the command "dir bootflash:" or "dir fla=
sh:"
> > to see exact file name. Usually these files have a file extension ".bin"=
.
> > You should provide FULL file name to successfully load router.
>
> > Good luck,
>
> > Mike
> > CCNP, CCDP, CCSP, CCVP, MCSE W2K, MCSE+I, Security+, etc.
> > CCIE R&S (in progress), CCIE Voice (in progress)
> > ------
> > Headset Adapters for Cisco IP Phoneswww.ciscoheadsetadapter.comwww.heads=
etadapter.com
>
>
>
> > > Hi everyone
> > > I just loaded a new IOS on my 2611 and it will not boot. I keep
> > > getting the message '
> > > open: file "n" not found
> > > open(): Open Error =3D -1
> > > loadprog: error - on file open
> > > boot: cannot load "flash:n"
> > > and when i try to manually boot the flash this is the message I get. I=
> > > am completely out of ideas.
>
> > > rommon 2 > boot flash:c2600-i-mz.122-12a
> > > open: file "c2600-i-mz.122-12a" not found
> > > open(): Open Error =3D -1c2600-i-mz.122-12a
> > > loadprog: error - on file open
> > > boot: cannot load "flash:c2600-i-mz.122-12a"
> > > rommon 3 >
>
> > > If anyone has any clue please tell me.
> > > Thanks- Hide quoted text -
>
> > - Show quoted text -
>
> I tried your dir bootflash: command and it gave me a bad device name
> error. does that mean ios is corrupt?
> Thanks for all your feedback- Hide quoted text -
>
> - Show quoted text -
its the right filename martin. i copy/pasted. I don't know if the ios
is just corrupt
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map