If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Peter on April 29, 2009, 9:12 am
I got 0X32 system with dr5 + 2 C1 cards
When i press Feature 811 display shows no calls.
When call cames in i can see info.
Any way to make this work?
I want to see history of all calls on this terminal.
|
|
Posted by Terry on April 30, 2009, 7:01 am
>I got 0X32 system with dr5 + 2 C1 cards
> When i press Feature 811 display shows no calls.
> When call cames in i can see info.
> Any way to make this work?
> I want to see history of all calls on this terminal.
0x32 with dr5 ? If it had 6.1 or so I would say to give it some log space.
|
|
Posted by Brian Cox on April 30, 2009, 8:37 am
> I got 0X32 system with dr5 + 2 C1 cards
> When i press Feature 811 display shows no calls.
> When call cames in i can see info.
> Any way to make this work?
> I want to see history of all calls on this terminal.
Look under "Terminals & sets - Telco features - Feature assign" Lines
must appear & ring to auto display. Change to Y to make a Caller ID
set for each line. Also check "First display" setting and set "Called
ID" to Y.
|
|
Posted by Amy on April 30, 2009, 3:29 pm
> I got 0X32 system with dr5 + 2 C1 cards
> When i press Feature 811 display shows no calls.
> When call cames in i can see info.
> Any way to make this work?
> I want to see history of all calls on this terminal.
When you press Feature 811, you are invoking the Call Info feature.
This feature only displays the incoming call information for active
calls. If you want to see a histroy of all calls on the terminal,
then you should use the Call Log feature (Feature 812). Additionally,
you'll want to make sure that the Call Log has been turned on and the
space allocated for each set(this is done through an Admin session).
Finally. . .if you have a 0x32 system, then there is no such thing as
"DR5" software for that system. You must have a Rls. 1.0 through Rls.
7.1 version. DR5 only applied to the older 3x8, 6x16, and 8x24
systems.
Jeff
|
|
Posted by Kenw on April 30, 2009, 4:51 pm
wrote:
>I got 0X32 system with dr5 + 2 C1 cards
>When i press Feature 811 display shows no calls.
>When call cames in i can see info.
>Any way to make this work?
>I want to see history of all calls on this terminal.
I was wondering about this myself. I have to go to a customer tomorrow
and they want CID to show also.
I am not sure if they have CI cards, but their calls are answered with a
Flash and do not ring on the sets.
I don't think a Flash will pass CID, but I may be wrong.
Also not sure of software version at this time.
KenW
|
| Similar Threads | Posted | | Feature 986 VM Transfer to MBox not working | February 18, 2005, 10:31 am |
| Do Not Disturb Feature | July 7, 2005, 5:48 pm |
| OTM feature list | January 11, 2006, 4:51 am |
| CallPilot Feature Codes | July 11, 2006, 10:04 am |
| Group Listening Feature | October 10, 2007, 10:04 am |
| M7000 Not Working | March 26, 2005, 3:19 am |
| Busy to VM is not working. | April 1, 2005, 10:37 am |
| Nortel Contivity / VPN Router and VRRP Deactivate feature | November 25, 2008, 10:05 am |
| Norstar/Callpilot not working as hoped! | May 4, 2007, 12:20 pm |
| Group call and Auto Answer feature to do Zone Page issue | March 13, 2007, 6:03 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map
> When i press Feature 811 display shows no calls.
> When call cames in i can see info.
> Any way to make this work?
> I want to see history of all calls on this terminal.