nortel 8600 bandwidth

nortel 8600 bandwidth
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.nortel  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
nortel 8600 bandwidth sow 06-12-2007
Posted by sow on June 12, 2007, 8:20 am
If you were  Registered and logged in, you could reply and use other advanced thread options
I've problem how to set up bandwidth on one brouter port, when I want
to set up by command "config ethernet 7/7 speed 10", I get info
"Error: port 7/7, Can't set admin speed on this port".
And mabye is another way to set port bandwidth, not only for default
speed 10,100,1000 Mb/s?


Network Magic 20% Off NMEASY coupon code spring banner 468x60
Posted by Dophi on June 12, 2007, 12:56 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
> I've problem how to set up bandwidth on one brouter port, when I want
> to set up by command "config ethernet 7/7 speed 10", I get info
> "Error: port 7/7, Can't set admin speed on this port".
> And mabye is another way to set port bandwidth, not only for default
> speed 10,100,1000 Mb/s?

Did you turn off the auto negociation on that port before setup speed?
Or you can use ACL or filter to limit the speed on that port.


Posted by MC on June 12, 2007, 8:43 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
sow wrote:
> I've problem how to set up bandwidth on one brouter port, when I want
> to set up by command "config ethernet 7/7 speed 10", I get info
> "Error: port 7/7, Can't set admin speed on this port".
> And mabye is another way to set port bandwidth, not only for default
> speed 10,100,1000 Mb/s?
>
Either the access level you are logged in on does not have privileged to
set that configuration, are you using rwa access ?
Or
That port is a fixed type port, is it a fiber port ?



Posted by sow on June 13, 2007, 12:16 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
of course that I'm in privileged mode rwa and of course that I truned
of auto negotiation and of course that my 8600 is turned on:)


Posted by sow on June 14, 2007, 12:43 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
ok I realised that on 1 Gb and fiber port is not possible to set
bandwidth, but on 100 mb ethernet port everything is fine and ok,
that's all...


Similar ThreadsPosted
Nortel Passport (7480) - Changing the ospf reference bandwidth November 8, 2006, 5:51 am
Bandwidth costs per GB for high volume website December 27, 2006, 9:26 am
Nortel 8600 commands - How do I locate a MAC? March 23, 2006, 1:18 pm
iBGP from Cisco 7200 to Nortel 8600 April 6, 2006, 4:34 am
Upgrading Nortel Passport 8600 from Release 3.1.5.0 to 4.1.1 October 24, 2006, 6:52 am
Nortel 8600 DHCP Relay (IP Helper) Question April 28, 2008, 9:06 am
Re: Nortel 8600 DHCP Relay (IP Helper) Question April 28, 2008, 9:00 am
problem with shifting client side ethernets on a Nortel Passport 8600 August 12, 2006, 2:35 pm
PP 8600 log msgs April 28, 2005, 8:20 am
ERS/Passport 8600 firmware May 5, 2008, 6:09 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map