|
Posted by on April 29, 2008, 8:17 pm
I have 7.1.0.3, 7.1.0.4, 7.4.0.6, 7.5.0.4 and 8.2.0.7
but I don't recall which one is best to use with Q40. I have an old copy
of the release notes for Q40 and read through those but saw no mention of
IMAT. What are you going to do when that old piece of iron finally dies?
You know of course Mitel has announced EOS for the 2K and hasn't supported
Q-stream for years. My email in the header in valid, just that you must
use the left & right brackets exactly as it appears. Send me an address.
>yeah, still the same old same old.
>
>I have the old 2000 as you suspect. And the 3 sx200's are at lw19r3
>(different feature levels tho).
>
>I have imat 7.3.0.10 installed at one 200 site, the pri card there connects
>ethernet.
>
>7.1.0.3 at 2 others, their 200 pri cards only have the 10 cpn subs and
>connect serially, IMAT doesnt even show the ethernet connect option.
>
>As the local computer with imat for the main site blew up, now, for the
>2000, I load IMAT at the first 200 site, and connect over the vpn to the
>switch. Apparently this seems to be the correct imat version, as it doesnt
>complain about different database versions. (The version I was using on the
>old box always asked me to convert, ime, not a smart thing to do!).
>
>I was just recently sent v 7.5.1.2 . Argh!!!!! I am just way to timid to
>try it on my 2000 as when I load the database, I get a message "The remote
>sites database is of an older revision. Some fields may not be applicable to
>this version. Select OK to continue loading or cancel to discontinue". Oh
>yay!
>
>Am I right in assuming that I will probably want to use 7.3.0.10?
>Unfortunately, I have no original install discs and I'm not enough of a
>Windows geek to transfer installed software from one machine to another and
>make it work.
>
>Perhaps theres an archive of wonderful Mitel stuff sitting on an old qnx box
>somewhere...
>
>Hope all is well with you!
>Best regards,
>Dave
>
>
>> Hello Mr. Henhouse. You certainly have had a number of issues with Mitel
>> charging you for their intellectual property over the years, huh? ;-)
>>
>> Anyway IMAT software is somewhat load specific. What vers of software are
>> you running on the sx2000/200? Last we spoke I think you were still
>> running LW29/Q-Stream. Is that still the case today?
>>
>>
>>>cant find the disc and the last time I asked our vendor for a piece of
>>>mitel
>>>software they charged us over $600 for their guy to download it at home on
>>>his dial up...
>>
>>>if any one has a copy or knows where I might d/l it from, much
>>>appreciated!
>>>
>>>(for the 200 and 2000)
>>>
>>
>>
>> ----== Posted via Pronews.Com - Unlimited-Unrestricted-Secure Usenet
>> News==----
>> http://www.pronews.com The #1 Newsgroup Service in the World! >100,000
>> Newsgroups
>> ---= - Total Privacy via Encryption =---
>
----== Posted via Pronews.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.pronews.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= - Total Privacy via Encryption =---
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map