|
Posted by Jack Nivak on July 15, 2007, 8:10 pm
If you were Registered and logged in, you could reply and use other advanced thread options Hongtian pretended :
> Maybe you can refer to following URL.
>
> http://www.myvoipapp.com/docs/manual.htm
>
> :-)
>
>> I want to set up an IP-PBX.I have two desk top computers and a
>> laptop,plus several jacks wired for network.I've been looking all over
>> the internet for some answers,but I just can't get the answer I'm
>> looking for.Plenty of software,hardware sites,but so far I have not
>> seen any pictures showing the physical hook up of all the componets.You
>> use a
>> spare computer as the IP=PBX server ok fine now how you hook up this
>> server to my existing network set up.I have a switch,and a router,I
>> don't want VOIP for now just the PBX part.Anybody can tell me what
>> kind of equipment I need,and how to hook the whole thing up. I have ten
>> jacks
>> wired up.Thanks
Thanks for your reply,this URL helped a little but as usual,they don't
show the physical parts and how they are connected together.For example
if you have a switch for the existing network how do you connect it to
the server,there must be some kind of interface that connects the
existing network to the PBX server.Thanks
|