|
Posted by JohnV@nn on February 13, 2007, 2:49 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Has anyone been able to get simple info (e.g. sysName) from a Polycom
VSX via snmp? Every attempt I have made resulted in an invalid or
unrecognized response from the unit. In other words, it responds but
the response is not recognized as a valid snmp packet. I've tried
this with two different VSX units (a 7000 and a 3000).
Note that I can receive traps from these units just fine.
Thanks,
John
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map