dual peer ebgp

dual peer ebgp

NewsGroups | Search | Tools
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
dual peer ebgp mmark751969 03-24-2008
Posted by mmark751969 on March 24, 2008, 11:38 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
i have a 7206 configuration that is running ebgp. This happens to be
running ebgp between 2 peers within the same isp however(same remote-
as number. Both of the peers have different ip addresses though).
This isp is handing us a 100mb ethernet connection over fiber. Just
wondering if it is accepted practice to be running ebgp this way
instead of having the peers at different isp's.

Posted by p_teatreeoil on March 25, 2008, 1:34 am
If you were  Registered and logged in, you could reply and use other advanced thread options
There are some advantages to being dual homed. You can be more
granular with your prefixes since your ISP will accept ones that are
longer than 24 bits (this is useful if your connections terminate on
different PE routers). Or, if your links both terminate on the same
PE router, you can load balance your traffic with multipath. Being
dual-homed to the same ISP is a lot less complicated than being multi-
homed, but you give up the advantage of being able to optimize based
on peering diversity between different ISPs.

Your situation is not unique and there is nothing wrong with doing it
that way; you're still getting at least some redundancy and it's a lot
easier to get started with one ISP. If and when you decide to move
on to ISP diversity, you'll want to be sure to familiarize yourself
with each ISP's BGP Policy and how they treat routes from their BGP
customers versus peer ISPs. Also, if you don't have your own ASN,
you'll have to get one through ARIN. You'll also have to consider
whether you want to load balance, which is not an exact science across
multiple ISPs, or if you will be using one connection as a pure
backup.

Lotsa stuff to think about if you're going to be multi-homed.


Similar ThreadsPosted
dual honed ebgp multihop March 31, 2008, 12:42 am
VPN Peer:ISAKMP: Peer Info for * not found January 6, 2006, 4:19 pm
PIX - loss of connection to it - and stopping peer to peer October 22, 2006, 2:57 pm
C3845, Dual Hub Dual DMVPN Hub-To-Spoke, Limitations? September 25, 2005, 8:58 pm
Recommended Hardware for eBGP November 2, 2005, 9:58 am
EBGP Neighbor limits (for you enterprise/ISP folks) August 24, 2004, 3:11 pm
Dynamic and peer-to-peer VPN on the same PIX October 4, 2006, 12:59 pm
Peer Ip address April 2, 2005, 5:36 am
What is "VPN Peer Sessions" - (PIX 501) January 5, 2006, 3:09 am
voip dial-peer November 29, 2004, 12:59 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map