|
Posted by LHradowy on February 28, 2005, 12:14 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I know there must be some one that has a DLINK 624 rev c wireless
router, and needs to connect to work thru there Cisco VPN client
software (4.0.5)
I am not trying to do this wireless, I am first just trying to connect
thru a LAN line.
I have been and still can connect if I remove the router out of the
picture and just connect thru my PPPoE client, then I can VPN. But,
this defeats the purpose of having a network at home.
DLINK 624 rec c
Firmware 2.50 ( Ihave also tried the previous version, no luck)
Windows XP, (firewall disabled)
I have set up the router, like there specs say to conform to the cisco
client.
Enbable PPTP and IPsec for my machine. As well as the virtual server.
I launched VPN and log in. Everything tells me I am connected, but when
I try to launch an app. If freezes and the Dlink router reboots.
I have tried changing the MTU size to 1452 instead of 1492, I have also
tried to change the MTU on the VPN client to 1300, and still no luck!
Am I missing something?!
Appreciate your help, I have been working on this for a couple of days
now, and I am going to give up.
QUESTION: What would be a FAIL SAFE wireless router for the Cisco VPN
client?
|
 
| |
Posted by John on February 28, 2005, 9:29 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> I know there must be some one that has a DLINK 624 rev c wireless
> router, and needs to connect to work thru there Cisco VPN client
> software (4.0.5)
I have the D-Link DI-604 and I had the exact same problem. It drove me
crazy!
Until I tried it on another computer on the same router - which was working
fine! So I ended up reinstalling Windows XP and now all works fine. I
think the problem was a windowsupdate of the network card, since then it
failed to work. I even bought a new router to solve this problem, but it
stayed, so I got even more crazy :-)
I know it sounds weird, since PPPoE is working, but it happened to me...
But before doing a reinstall... try to use it on another computer at your
router...
good luck
here are my settings:
disable SPI (my VPN is not working when enabled!)
UPnP is on here
VPN pass through on (both for PPTP and IPSec)
XBOX diabled
DoS protection disabled
|
| Similar Threads | Posted | | VPN tunnel between Dlink DFL-700 and Cisco | January 18, 2007, 2:57 pm |
| Cisco 3005 Concentrator + DLink 804HV Router | July 20, 2005, 11:46 pm |
| Cisco VPN 3000 Series connecting to a DLINK DI 804HV | January 13, 2007, 11:50 am |
| Cisco 3030 doesn't work after 21st connection | August 10, 2005, 2:27 pm |
| Odd problem with DLink DI-804HV | November 3, 2005, 3:50 pm |
| Need help with Dlink DI 808HV VPN Setup | December 4, 2005, 7:37 am |
| Dlink VPN drive map problem | December 7, 2005, 4:38 pm |
| Dlink IKE VPN - Blocked Ports??? | January 4, 2007, 9:23 pm |
| Problems with PPTP VPN and DLink DI-808HV | July 10, 2005, 7:10 am |
| Dlink DFL-80 VPN router Dropping packets | March 3, 2008, 10:47 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map