|
Posted by Ken Gallagher on January 3, 2007, 2:26 pm
If you were Registered and logged in, you could reply and use other advanced thread options A host in subnet 10.85.1.128/25 (which goes from
10.85.1.128-10.85.1.255) cannot contact a host in subnet 10.85.2.128/25
(which goes from 10.85.2.128-255) without the assistance of a router or
layer 3 switch. They are not in the same subnet, thus layer 2
communication would not be possible.
joseph wrote:
> host in subnet 10.85.1.128/25 can contact host in subnet 10.85.2.128/25
> ?
> joseph a =E9crit :
>
> > Yes it on layer 3 switch with SVI interface for vlan
> > Lonewolf a =E9crit :
> >
> > > A router or layer 3 switch.
> > >
> > > > Hi,
> > > >
> > > > I've been looking for a while how i can have differents subnets in =
the
> > > > same voice vlan and see each other :
> > > >
> > > > ex:
> > > > - phone on subnet 10.85.1.128/25 can see Call Manager on
> > > > 10.85.0.128/25
> > > > - phone on subnet 10.85.2.128/25 can see Call Manager on
> > > > 10.85.0.128/25
> > > >
> > > > thanks
> > > >
> > > > joseph
> > > >
|