|
Posted by nortel user on July 25, 2006, 5:13 am
If you were Registered and logged in, you could reply and use other advanced thread options
I have a small BCM50 system.
We have IP 2002 / 2004 telephones.
I have just 1 huntgroup set up on our main office number that makes all
the phones on the system ring (only 6 handsets)
Can I configure the BCM so that the ring tone is different when a call
comes into the hutgroup.
I want a ring tone for the main huntgroup and a different tone for
internal calls (and also for DDIs if possible so that users who have a
call to their DDI know that they need to pick up, the office here is
quite small so the users cannot always tell when only their extension
is ringing and I have seen them not bother picking up on a DDI call as
they expect the 2 people who pick up on the main huntgroup number to
pick up the call)
Any advice on how I could possibly set up the above (mainly different
ring for Internal extensions) is appreciated.
Thanks
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map