|
Posted by Dingo on June 1, 2008, 5:10 pm
wrote:
> Colleagues,
>
> How can I figure out if an E1 link is operational or it is looped at the
> remote? I see no difference in the output of the command "d lp/1 e1/2"
> when I check.
>
> Thanks in advance for any input.
>
> --
> Victor Sudakov, =A0VAS4-RIPE, VAS47-RIPN
> 2:5005/49@fidonethttp://vas.tomsk.ru/
Set Test to manual
Start test to see if you RX exactly the same amount of frames/bits
that you tx
|