If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by sada1981 on May 20, 2007, 6:46 am
dear all,
i have to ISP lines, connected to 2 cisco 2800 router each, i want to
have loadbalancing over these two lines so can you help me with this
configuration?
Regards
sadam
|
|
Posted by Trendkill on May 20, 2007, 10:26 am
> dear all,
> i have to ISP lines, connected to 2 cisco 2800 router each, i want to
> have loadbalancing over these two lines so can you help me with this
> configuration?
> Regards
> sadam
Perform a search on your question within this group. This question
comes along about once a month. Basically you need to connect both
routers to your 'core', and ensure that they are advertising their
default routes back to the core via the same IGP. On the core side,
you need to ensure that the two default routes have the same metric,
and provided you are using Ripv2, OSPF, or EIGRP, it will load
balance.
However, this only manages outbound traffic. Depending which ISP you
go out, which website or external network you are accessing, and how
your ISP is advertising your network will determine which path the
traffic takes back. Considering your internet traffic could be much
higher download than upload, load balancing externally will only help
you so much.......
|
| Similar Threads | Posted | | Cisco for load balancing w/o BGP | October 11, 2006, 12:14 pm |
| Load Balancing / Load Sharing over parallel paths | November 21, 2005, 9:14 am |
| server load balancing using a cisco | July 14, 2005, 9:34 am |
| CSM load balancing? | March 6, 2005, 11:40 am |
| load-balancing t1s | August 30, 2005, 2:54 pm |
| Load Balancing | February 20, 2006, 11:33 am |
| OER and load balancing | March 2, 2006, 10:06 am |
| load balancing | January 3, 2007, 8:35 pm |
| load-balancing t1s | February 16, 2007, 1:43 pm |
| To QoS or load-balancing or both | July 21, 2008, 5:35 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map
> i have to ISP lines, connected to 2 cisco 2800 router each, i want to
> have loadbalancing over these two lines so can you help me with this
> configuration?
> Regards
> sadam