cisco 7960 POE on linksys SRW 244 P

cisco 7960 POE on linksys SRW 244 P

NewsGroups | Search | Tools
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
cisco 7960 POE on linksys SRW 244 P Christine 08-02-2006
Posted by Christine on August 2, 2006, 9:30 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi all,

just got my new linksys srw224 switch with poe (power over ethernet).
Tried to hook up a couple of cisco 7960 phones, so that we could throw
those *()!@JJ power-adapters away... But, the 7960's (not -G models)
do not seem to work with the linksys :-(((
I found out that I should cross 4and7 & 5and8 on the connected cable,
tried it, but no luck :-(((
Anybody has a clue for us ?

regards and thankz !

Christine



Network Magic Graduation 20% off animated banner
Posted by www.BradReese.Com on August 2, 2006, 10:34 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi Christine,

The following Cisco IP Phones have been tested by Linksys and are:

NOT COMPATIBLE

when connected to the SRW224P switch.

Because these Cisco IP Phone models are not IEEE 802.3af compliant:

7960
7940
7910
7912
7905
7902

------------------------------------------------------------------

The following Cisco and Linksys One IP Phones have been tested by
Linksys and are:

COMPATIBLE

when connected to the SRW224P switch.

Cisco IP Phones:

7970G
7971G
7961G
7941G
7911G

Linksys One IP Phones:

PHM1200

------------------------------------------------------------------

Hope this helps.

Brad Reese
http://www.BradReese.Com
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
USA & Canada: 877-549-2680
International: 828-277-7272
Fax: 775-254-3558
AIM: R2MGrant
BradReese.Com - Cisco Power Supply Headquarters
http://www.bradreese.com/cisco-power-supply-inventory.htm


Posted by Christine on August 2, 2006, 11:26 am
If you were  Registered and logged in, you could reply and use other advanced thread options

> Hi Christine,
>
> The following Cisco IP Phones have been tested by Linksys and are:
>
> NOT COMPATIBLE
>
> when connected to the SRW224P switch.
>
> Because these Cisco IP Phone models are not IEEE 802.3af compliant:
>
> 7960
> 7940
> 7910
> 7912
> 7905
> 7902
>
> ------------------------------------------------------------------
>
> The following Cisco and Linksys One IP Phones have been tested by
> Linksys and are:
>
> COMPATIBLE
>
> when connected to the SRW224P switch.
>
> Cisco IP Phones:
>
> 7970G
> 7971G
> 7961G
> 7941G
> 7911G
>
> Linksys One IP Phones:
>
> PHM1200
>
> ------------------------------------------------------------------
So I Found out :-(

But is there a workaround as anybody will know perhaps ?

thanks ! Christine



Posted by rick on August 2, 2006, 1:41 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi Christine,

I don't think the G versions are compatible with that linksys switch
either, since the phones are not 802.3af compatible. the only way is
to either upgrade to the 41/61/71 models, or buy a cisco inline power
switch that supports pre-standard PoE [such as a WS-C3560-24PS-S,
cheapest one i think]

wrote:

>Hi all,
>
>just got my new linksys srw224 switch with poe (power over ethernet).
>Tried to hook up a couple of cisco 7960 phones, so that we could throw
>those *()!@JJ power-adapters away... But, the 7960's (not -G models)
>do not seem to work with the linksys :-(((
>I found out that I should cross 4and7 & 5and8 on the connected cable,
>tried it, but no luck :-(((
>Anybody has a clue for us ?
>
>regards and thankz !
>
>Christine
>


* We buy and sell new/used networking equipment. Please contact me if
you have any offers or are interested in buying *

** GUARANTEED REAL CISCO, in stock! ALL prices in USD **

50 x CP-7940G= NEW IN BOX @ $260/each

50 x CP-7960G= NEW IN BOX @ $320/each

2 x CISCO1760 (64D/32F) USED @ $500.00

1 x CISCO1760-VPN/K9 (96D/32F) USED @ $650.00

1 x CISCO3640 (64D/32F) USED @ $375.00

5 x CISCO7206VXR= [chassis with single AC power ONLY] NEW IN BOX @ $3800/each

20 x NM-2FE2W USED @ $550/each

2 x NPE-G1= NEW IN BOX @ $9000/each

10 x PVDM-12 USED @ $120/each

6 x PVDM2-8 USED @ $240/each

20 x PVDM2-16 USED @ $300/each

20 x PVDM2-32 USED @ $850/each

10 x PVDM2-48 USED @ $1000/each


Rick Truong
TruTech Systems
AIM: ricktrutek
E-Mail: rick at trutechsystems dot net


Similar ThreadsPosted
Cisco 7960 Firmware :( February 25, 2004, 12:18 pm
Cisco 7960 SIP phones April 19, 2006, 9:16 am
Cisco 7960 firmware error August 20, 2004, 2:13 pm
Cisco 7960 rebild (skinny) October 11, 2005, 12:24 pm
Need help installing a Cisco 7960 phone November 8, 2005, 11:23 pm
Cisco 7960 and CallManager 4.1(3) Question November 18, 2005, 10:24 am
Cisco IP phone 7960 problems April 10, 2006, 10:03 pm
SIP firmware image for Cisco 7940 or 7960 February 11, 2005, 3:12 am
7940/7960 phones with non-Cisco equipment August 31, 2005, 12:45 pm
Cisco 7960 tftp size error. September 13, 2005, 12:25 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map