|
Posted by squid on June 15, 2008, 3:23 pm
If you were Registered and logged in, you could reply and use other advanced thread options > squid wrote:
> > Hellos,
> > I have a cisco 3640 router am trying to add a fastethernet card but
> > the IOS is not detecting it.The card has been tested and working on
> > other routers. I upgraded from IOS c3640-d-mz.112-7a.P to c3640-js-mz.
> > 122-40 but still is unable to detect it. The port has a serial
> > interface that is ok please help.
>
> > Squid
>
> http://www.cisco.com/en/US/products/hw/routers/ps274/products_relevan...
>
> Check whether you can find your module in these list. If so click on the
> module's name and check needs to run the module.
>
> For NM-1GE for example you can find this:
>
> Product Number Minimum Cisco IOS Software Version
> NM-1GE 12.2(11)YT
>
> Supported Platforms Maximum Number of Modules Supported
> Cisco 2691 1
> Cisco 3660 2
> Cisco 3725 1
> Cisco 3745 2
> Cisco 3825 1
> Cisco 3845 2
>
> As you can see this one isn't supported on C3640. Maybe that's the case for
your
> module. Can't tell you exactly, you didn't give us the exact module's name.
>
> I know this one isn't your module :)
WIC 1ENET is the module am using
Thanks squid
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map