cant ping when adding secondary ip to 1 fastethernet interface on 1700 router

cant ping when adding secondary ip to 1 fastethernet interface on 1700 router

NewsGroups | Search | Tools
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
cant ping when adding secondary ip to 1 fastethernet interface on 1700 router jcharth 08-17-2005
Posted by on August 17, 2005, 12:14 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
I am testing on a local router adding a second ip. when i add a
secondary ip in the same subnet everything works but when i add a
secondary ip in a different subnet i cant ping from or to the router. i
also try adding a second ip route 0.0.0.0 0.0.0.0 mynewgateway but that
did not work. I will change providers soon and i would like to make
sure that when they put the router in the new location everything will
continue working. can this be done?
thanks



Network Magic Graduation 20% off animated banner
Posted by shen@axentra.net on August 17, 2005, 8:35 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
(config-if)#no ip split-horizon



Posted by on August 18, 2005, 3:06 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Thanks, I almost thought that was going to work. I was adviced to set
the default route as the interface and worked better but it did not
solve the problem. I will upload the configuration to the router with
the changes using tftp that is probably the best way.



Similar ThreadsPosted
adding a second ip to a cisco 1700 interface August 12, 2005, 8:22 am
Adding Secondary Power Supply to VPN 3015 December 1, 2005, 10:02 pm
Setting up a router with 29 Global IPs, BUT can't ping router internal interface from server or server interface from router December 11, 2005, 10:37 am
adding 8 port switch to ethernet interface on 1812 router May 29, 2006, 1:14 am
Adding secondary gateway to cisco 3550 switch for link fail over December 15, 2005, 12:09 am
Cisco 2600 FastEthernet 0/0 is up/up,but ping time out! November 11, 2004, 9:40 pm
allow PING from outside to router vlan interface October 23, 2008, 2:20 pm
AP : How to disable DHCP service on the Fastethernet Interface ? October 14, 2008, 12:59 pm
IRB BVI0 interface, no ping possible from the router to inside hosts September 17, 2008, 1:53 pm
Secondary IP address on PIX ethernet interface April 25, 2006, 12:55 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map