|
Posted by on June 4, 2007, 10:03 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Hey whats up..I have a callpilot rls 2.01.27 1002rp, the server works
real slow, it needs to be rebooted at times to come back. I checked
the event codes and alarm monitor the only code that is crytical is
38728 and I can't find any info on that code anywhere. I know
callpilot pretty well, I ran every diagnostic test you can run and
they all passed. I know i need new PEP's, also the led's on the front
panel for the hard drives (the six lights) only 0 and 3 flash the
others never do. My RAID say's for a01-01 channel 1 sc id 0, the next
a02-01 channel 1 sc id 1, a03-01 channel 1 sc id 2 , etc.. I think
this is wrong even though they all say online the documentation says
the first one a01-01 should say channel 0 sc id 0 and so on. Can this
be my problem. I also think this has the old scsi power ribbon cable
that needs to be retrofitted with Nortel's new one.Thanks
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map