If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Justin on December 2, 2009, 1:23 am
Two days ago my WRT54G V6 started cutting out the internet connection
for no reason.
I updated the firmware and that didn't help. Per Google I changed the
MTU from auto to 1492, I thought that worked until just now it cut out
on me.
The cable modem is a Linksys BEFCMU10 version 4.
When I go to its diagnostic page http://192.168.100.1/ this is what I get:
Modem
Standard Specification Compliant DOCSIS 2.0
Hardware Version v2.0
Software Version 2.0.3.4.2-1212
Cable Modem MAC Address <removed>
Cable Modem Serial Number <removed>
CM certificate Installed
CONNECTION:
Startup Procedure
Status Comment
Acquire Downstream Channel 723000000 Hz Locked
Connectivity State Operational Operational
Boot State OK Operational
Security Enabled BPI+
Downstream Channel
Lock Status Operational
Modulation 256QAM
Channel ID 45
Provisioned Rate 6600 kbps
Symbol Rate 5360.537 Ksym/sec
Downstream Power 1.2 dBmV
SNR 38.2 dB
Upstream Channel
Lock Status Operational
Modulation 16QAM
Channel ID 2
Provisioned Rate 1100 kbps
Symbol Rate 5120 Ksym/sec
Upstream Power 37.2 dBmV
and the log
Time Priority Description
2009-12-02 01:13:12 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-02 01:13:08 critical No Ranging Response received - T3
time-out
2009-12-02 01:13:03 critical Received Response to Broadcast
Maintenance Request, But no Unicast Maintenance opportunities received -
T4 timeout
2009-12-02 01:12:30 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 22:56:19 critical Received Response to Broadcast
Maintenance Request, But no Unicast Maintenance opportunities received -
T4 timeout
2009-12-01 22:55:47 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 20:57:49 critical Received Response to Broadcast
Maintenance Request, But no Unicast Maintenance opportunities received -
T4 timeout
2009-12-01 20:57:16 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:58:03 critical No Ranging Response received - T3
time-out
2009-12-01 00:57:58 critical Received Response to Broadcast
Maintenance Request, But no Unicast Maintenance opportunities received -
T4 timeout
2009-12-01 00:57:57 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:26 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:24 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:23 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:21 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:21 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:18 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:16 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:15 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:14 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:12 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:11 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:09 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:07 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:06 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:04 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:03 critical DHCP FAILED - Request sent, No response
2009-12-01 00:57:02 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:57:00 critical DHCP FAILED - Request sent, No response
2009-12-01 00:56:59 critical Started Unicast Maintenance Ranging -
No Response received - T3 time-out
2009-12-01 00:56:57 critical DHCP FAILED - Request sent, No response
1970-01-01 00:00:06 critical No Ranging Response received - T3
time-out
|
|
Posted by f/fgeorge on December 2, 2009, 5:51 am
On Wed, 02 Dec 2009 01:23:10 -0500, Justin
>Two days ago my WRT54G V6 started cutting out the internet connection
>for no reason.
>I updated the firmware and that didn't help. Per Google I changed the
>MTU from auto to 1492, I thought that worked until just now it cut out
>on me.
>The cable modem is a Linksys BEFCMU10 version 4.
>When I go to its diagnostic page http://192.168.100.1/ this is what I get:
>Modem
Maybe your router is getting hot or going bad? I have Comcast and the
same router and it works just fine. Have you tried an alternative
software for the router?
|
|
Posted by Justin on December 2, 2009, 5:00 pm
f/fgeorge wrote:
> On Wed, 02 Dec 2009 01:23:10 -0500, Justin
>
>> Two days ago my WRT54G V6 started cutting out the internet connection
>> for no reason.
>> I updated the firmware and that didn't help. Per Google I changed the
>> MTU from auto to 1492, I thought that worked until just now it cut out
>> on me.
>> The cable modem is a Linksys BEFCMU10 version 4.
>> When I go to its diagnostic page http://192.168.100.1/ this is what I get:
>> Modem
>
> Maybe your router is getting hot or going bad? I have Comcast and the
> same router and it works just fine. Have you tried an alternative
> software for the router?
Its not getting hot, it has been sitting in the same place for the last
year without a problem. There's no dust.
I heard about alternative firmwares for the Linksys...
Which one should I try?
|
|
Posted by f/fgeorge on December 2, 2009, 6:19 pm
On Wed, 02 Dec 2009 17:00:50 -0500, Justin
>f/fgeorge wrote:
>> On Wed, 02 Dec 2009 01:23:10 -0500, Justin
>>
>>> Two days ago my WRT54G V6 started cutting out the internet connection
>>> for no reason.
>>> I updated the firmware and that didn't help. Per Google I changed the
>>> MTU from auto to 1492, I thought that worked until just now it cut out
>>> on me.
>>> The cable modem is a Linksys BEFCMU10 version 4.
>>> When I go to its diagnostic page http://192.168.100.1/ this is what I get:
>>> Modem
>>
>> Maybe your router is getting hot or going bad? I have Comcast and the
>> same router and it works just fine. Have you tried an alternative
>> software for the router?
>Its not getting hot, it has been sitting in the same place for the last
>year without a problem. There's no dust.
>I heard about alternative firmwares for the Linksys...
>Which one should I try?
All the reviewers like Tomato, I use HyperWrt 2.0, it works fine for
me.
|
|
Posted by Justin on December 2, 2009, 11:16 pm
f/fgeorge wrote:
> On Wed, 02 Dec 2009 17:00:50 -0500, Justin
>
>> f/fgeorge wrote:
>>> On Wed, 02 Dec 2009 01:23:10 -0500, Justin
>>>> Two days ago my WRT54G V6 started cutting out the internet connection
>>>> for no reason.
>>>> I updated the firmware and that didn't help. Per Google I changed the
>>>> MTU from auto to 1492, I thought that worked until just now it cut out
>>>> on me.
>>>> The cable modem is a Linksys BEFCMU10 version 4.
>>>> When I go to its diagnostic page http://192.168.100.1/ this is what I get:
>>>> Modem
>>> Maybe your router is getting hot or going bad? I have Comcast and the
>>> same router and it works just fine. Have you tried an alternative
>>> software for the router?
>> Its not getting hot, it has been sitting in the same place for the last
>> year without a problem. There's no dust.
>> I heard about alternative firmwares for the Linksys...
>> Which one should I try?
>
> All the reviewers like Tomato, I use HyperWrt 2.0, it works fine for
> me.
Both of which I can't use due to version 6.0.
|
Page 1 of 4 1 2 3 > last >>
| Similar Threads | Posted | | Can't get internet using Comcast cable modem and Lynksys WRT54G router | January 30, 2006, 12:32 am |
| DD-WRT/WRT54G Will not display LAN/WAN IP just 0.0.0.0 for everything! | September 10, 2006, 1:31 pm |
| Can't get to HTTP server on LAN behind WRT54G | August 26, 2007, 1:58 pm |
| Random disconnections from a Terayon TJ715x cable modem? | September 29, 2008, 7:08 pm |
| Re: IMPORTANT!! ALL COMCAST Subscribers!! PLZ READ! COMCAST COMCAST | November 1, 2006, 11:36 am |
| Re: IMPORTANT!! ALL COMCAST Subscribers!! PLZ READ! COMCAST COMCAST | November 6, 2006, 2:04 pm |
| Comcast | November 15, 2005, 5:33 pm |
| What is it with Comcast DNS | September 17, 2006, 4:46 pm |
| What up with Comcast DNS? | October 26, 2006, 2:54 pm |
| Comcast MTU | August 27, 2007, 10:16 pm |
|
|
Cable Modem Serial Number <removed>