|
Posted by richard pijlgroms on March 27, 2008, 6:06 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Hello,
We try to install a 5505 with no nat-control. We have public addresses
(subnet) for outside and public for inside. But we cannot route between
the two interfaces. We turn off nat-control and we removed all nat
lines.
We put in an ACL to allow traffic from outside to inside. (outside sec=0
inside sec=100) But in the syslogs we get the message while doing an
ping or trace from the ASDM tools: unable to get next hop for
xx.xx.xx.xx where xx is on our inside interface. We only put in a static
route for the outside interface. 0.0.0.0/24 to next hop.
The asa is on a dmz_restricted license. Can that be the problem ? Or are
we missing something ??
We are using pix 506 for a while like this but the asa is a little
different in this
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map