|
Posted by on April 28, 2005, 2:20 am
If you were Registered and logged in, you could reply and use other advanced thread options
OK I've made some progress, I left a unit plugged in and after 2 sets of
arrow flashing it came up on the system. That phone came up on x259
while the user sitting there should be at x242. I then found another phone
and plugged it in. It came up as x249. Obviously something is stored in
the phone that is telling the system what extension to come up on. How
do I erase, set or reset the extension number in the phone?
I'm also still wondering about the second question as well. I have the
correct names on the sets via the F**266344 menu but the lines are
labeled "Line 223", "Line 224" etc. One and only one is edited to a
person's name. Should I edit them all to the person's name or perhaps
some other data?
Don
> 1. arrow flashing is normal and a unit can take up to a minute to be
> programmed by the system. Plug one and and go get a cup of coffee, if
> by the time you get back it still is flashing then somehow the system
> doesnt know how to program that type of phone.
>
> 2. Not sure on this answer.. You metion the word "line". Do you mean
> external line? Internal numbers should be programmed with user names.
> External ... i have never touched..so I dont know.
>
> 3. Depending on the system and settings the extension at the wall plate
> could be meaningless. As you could have set relocation turned on. On
> systems without "set relocation" turned on I have always just had to
> plug a phone in and see what i got. Once the phone is plugged in you
> can do a
> feature * 0 intercom button.
> This tells you the internal number and what you have programmed for the
> name.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map