|
Posted by Uli Link on June 10, 2005, 2:31 pm
If you were Registered and logged in, you could reply and use other advanced thread options AM schrieb:
> Hi all,
>
> I'm going to change an Orinoco PCMCIA card (inserted in a Linux box)
> with a Cisco Aironet series. We are using it to have Internet
> connectivity. The provider also uses Orinoco products (it should be an
> Orinoco Tsunami Quick...)
> I would know whether any of you knows if Cisco works fine together with
> Orinoco devices.
> Is there any aspects I should take care about this?
It should work as station.
The other way round an ORiNOCO (aka Hermes I chipset) can assiocate to
Aironet APs if configuration allows.
If you need bridging the airo_cs driver is different from orinoco_cs or
hostap driver.
--
Uli
|