|
Posted by PS on January 20, 2007, 2:10 pm
If you were Registered and logged in, you could reply and use other advanced thread options
We want our wireless clients to get their IP address assigned by the router on
the
network, not the AP.
We tried configuring the 1100 with a static IP address in the proper subnet, as
well as
setting it as DHCP so it would get its own address from the router. Both of these
configurations work as far as the 1100 being seen on the network. However,
wireless
clients never get an IP address despite being able to connect to the signal. The
1100
seems to not want to pass these DHCP requests through to the DHCP server on the
router.
How can this be resolved?
|