Win 2000 and Cable Modem Access to Internet

Win 2000 and Cable Modem Access to Internet

NewsGroups | Search | Tools
 comp.dcom.modems.cable  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Win 2000 and Cable Modem Access to Internet douglas moore 05-18-2005
Posted by douglas moore on May 18, 2005, 12:54 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


I recently took an older computer home from work but I am having no
luck getting it to connect to the internet. It is an SGI 320, running
Windows 2000. I have a cable modem (which works fine with my Mac G3
laptop) and I have internet access via Cox cable.

I have made sure that the Network Identification is no longer set up to
have the computer as part of a network domain (it was at work), and I
have revised the Network and Dial-Up Settings per Cox's recommendations
(TCP/IP set to dynamic addressing and 'Client for Microsft Networks'
installed). Still no luck.

When I run ipconfig from the cmd window, I get:
Connection Secific DNS Suffix: (blank)
Autoconfig IP address: 169.254.192.78
Subnet Mask: 255.255.0.0
Defauly Gateway: (blank)

I understand that the IP address 169.254.192.78 is a Windows default,
and it means that I am not actually communicating with Cox. I have
tried ipconfig/release and ipconfig/renew to no avail.

Any suggestions? Thanks, in advance.
Doug



Pure Networks
Posted by James Knott on May 18, 2005, 4:09 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


douglas moore wrote:

> Any suggestions?  Thanks, in advance.

Use ethereal, to see what's on the wire. Also, make sure your cables are
OK.




Posted by Warren on May 18, 2005, 5:02 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


douglas moore wrote:
>I recently took an older computer home from work but I am having no
> luck getting it to connect to the internet. It is an SGI 320, running
> Windows 2000. I have a cable modem (which works fine with my Mac G3
> laptop) and I have internet access via Cox cable.
>
> I have made sure that the Network Identification is no longer set up to
> have the computer as part of a network domain (it was at work), and I
> have revised the Network and Dial-Up Settings per Cox's recommendations
> (TCP/IP set to dynamic addressing and 'Client for Microsft Networks'
> installed). Still no luck.
>
> When I run ipconfig from the cmd window, I get:
> Connection Secific DNS Suffix: (blank)
> Autoconfig IP address: 169.254.192.78
> Subnet Mask: 255.255.0.0
> Defauly Gateway: (blank)
>
> I understand that the IP address 169.254.192.78 is a Windows default,
> and it means that I am not actually communicating with Cox. I have
> tried ipconfig/release and ipconfig/renew to no avail.
>
> Any suggestions? Thanks, in advance.


I would suggest removing the NIC, reboot three times, and then reinstall the
NIC.

I could write 1000 words on things to check, do and try, as well as
alternative paths as well. But this may accomplish all the same with a
little brute force. Rebooting three times is essentially to remove the
record of the last successful boot. Simply removing the card, rebooting
once, and putting it back in could result in identical initialization of the
hardware because the old registry entries would still be there. If you have
spare slots, moving the NIC to a different slot wouldn't be a bad idea,
either.

--
Warren H.

==========
Disclaimer: My views reflect those of myself, and not my
employer, my friends, nor (as she often tells me) my wife.
Any resemblance to the views of anybody living or dead is
coincidental. No animals were hurt in the writing of this
response -- unless you count my dog who desperately wants
to go outside now.
Find Black and Decker Landscaping Equipment. Get a Hog:
http://www.holzemville.com/mall/blackanddecker/index.html





Posted by douglas moore on May 19, 2005, 4:53 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Thanks for all the suggestions. I did manage to get it working. On
the advice of a friend at work I uninstalled the network card via the
Hardware Manager and shut down the computer (but I did not physically
remove it from the machine). When I restarted it, it had reinstalled
the card and everything worked just fine. Go figure.
Thanks for all the suggestions.
Doug



Posted by Jim on May 18, 2005, 5:30 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


douglas moore wrote:
> Any suggestions? Thanks, in advance.
> Doug
>

You don't mention a router so I will assume you are connecting the
computer from work directly the cable modem. After disconnecting your
MAC and connecting the computer from work did you power cycle the cable
modem?


Similar ThreadsPosted
Toshiba PCX 2000 Cable Modem For Sale April 18, 2005, 9:37 am
Splitting cable for internet access August 3, 2006, 8:30 pm
Technicalities of cable high-speed internet access November 6, 2007, 4:44 pm
BroadbandEdge 2000 System (Terayon) CMTS March 6, 2006, 6:24 pm
Limited Access to Internet sites January 23, 2006, 8:25 pm
Linksys Cable/DSL modem allows access to WAN September 29, 2005, 8:37 pm
legality of selling/sharing cable access with a neighbor December 30, 2005, 9:34 pm
Cisco uBR905 Cable Access Router - Full Duplex September 20, 2007, 8:03 pm
lost Internet connection with cable modem February 8, 2006, 7:54 pm
internet network goes out, but cable modem and router seem to be working August 9, 2005, 7:59 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map