|
Posted by Simon on December 13, 2006, 9:44 am
If you were Registered and logged in, you could reply and use other advanced thread options
> miketop1@gmail.com wrote:
>> Please,
>> I just want to have the picture of how they're linked to each other
>> (using IP addressing).
>>
>> The thing is; I am trying to set up a VPN connection between two LANs
>> located far from each other; in two different cities (each has about 50
>> users).
>>
>> The thing is I am not sure if what I have in planning is right.
>>
>> I plan to get 2 Class C addresses from an ISP, on for each LAN. I will
>> apply subnetting to each, by making use of a router (VPN,cisco branded)
>> on each LAN. This routers will have 5 switches connected to them, then
>> inturn 10 PCs will be connected to each of the switches, to make a
>> total of 50 PCs on each LAN; so far is this setting ok?
>>
>> Now,
>> The thing is, I am not sure how I will configure each router to speak
>> to each other over the internet. I know it can't be as straight forward
>> as I plan on doing it; i.e. by me somehow including in the router (LAN
>> A) the Public IP address of router (LAN B) and Vice-Versa.
>> Please, what I have just said, is it in anyway right? or am I missing
>> something?
>>
>> Basically, just want to have a sort of picture of how everything will
>> be linked via. IP addresses.
>>
>> Thank you.
>>
>> N.B.
>>
>> If you need to know, I plan on implementing a Remote Access VPN (SSL),
>> which I believe will be web-based.
>> Thank you so much.
>>
> You don't need class C's for each site, private address ranges will work
> as long as they are different each end and you use nat. A static IP for
> the wan address of the router should be enough.
> simon
I mean't you don't need public class Cs for the lans :)
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map