If you were Registered and logged in, you could reply and use other advanced thread options
Well the subject line says most of it. I am running Windows XP Pro and
using the Cisco VPN client (version 3.6.4). I can connect and use the
VPN fine when I am either jacked into a hardwire network, or on a WIFI
connection. However, when I am on dialup, the connection looks like it
has been established properly, but I can't talk to anything on the
other side of the connection.
One possible hint is that I can ping a computer that I know is there,
but I can't map drives or reach our source code repository which uses a
URL like: "http://ijparamlabii/repos"
Any ideas?
Mike+
Posted by on August 4, 2006, 9:39 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
Sound like you have some personal firewall switched on.
Bill
Posted by on August 6, 2006, 8:58 pm
If you were Registered and logged in, you could reply and use other advanced thread options
There is, but it's also there when on the LAN or WIFI connection. Plus,
I have tried turning it off with no luck. Might there be a protocol
that needs to be loaded under the dialup?
Mike+
billnet1999@yahoo.com wrote:
> Hi,
> Sound like you have some personal firewall switched on.
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map