|
Posted by Brian Johansen on February 20, 2007, 3:35 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I am currently trying to install the latest vpn client from cisco on vista
(R 5.0.00.0090-k9-beta), but I get an error during install
of the deterministic network enhancer:
InstallDNE
Error: Dneinst execution error while installing DNE, returncode -2146500093
The installer hereafter does a roll back on the installation.
I am not using the MSI installer. I run as Administrator. I also tried R
4.8.02.0010-k9 with same problem.
Any ideas ?
Best regards
Brian
|
|
Posted by Lordscort on February 20, 2007, 4:13 am
If you were Registered and logged in, you could reply and use other advanced thread options
> Hi,
>
> I am currently trying to install the latest vpn client from cisco on vista
> (R 5.0.00.0090-k9-beta), but I get an error during install
> of the deterministic network enhancer:
> InstallDNE
> Error: Dneinst execution error while installing DNE, returncode -21465000=
93
>
> The installer hereafter does a roll back on the installation.
>
> I am not using the MSI installer. I run as Administrator. I also tried R
> 4.8.02.0010-k9 with same problem.
>
> Any ideas ?
>
> Best regards
>
> Brian
Hi Brian,
I=B4m currently working with the versi=F3n 4.8.02.0010 (installed from the
msi). And work perfectly. During the installation i run it as
Administrator but when it=B4s installed i use it as a normal user and
works ok.
I hope this can hep you.
Best Regards
Luis
|
|
Posted by Brian Johansen on February 20, 2007, 4:52 am
If you were Registered and logged in, you could reply and use other advanced thread options
How did you elevate the MSI installer ? If I right click the file, I am only
able to choose install. If I run the installshield version I can
choose Runas Administrator.
But both still shows the same error message ?
best regards
Brian
> Hi,
>
> I am currently trying to install the latest vpn client from cisco on vista
> (R 5.0.00.0090-k9-beta), but I get an error during install
> of the deterministic network enhancer:
> InstallDNE
> Error: Dneinst execution error while installing DNE,
> returncode -2146500093
>
> The installer hereafter does a roll back on the installation.
>
> I am not using the MSI installer. I run as Administrator. I also tried R
> 4.8.02.0010-k9 with same problem.
>
> Any ideas ?
>
> Best regards
>
> Brian
Hi Brian,
I´m currently working with the versión 4.8.02.0010 (installed from the
msi). And work perfectly. During the installation i run it as
Administrator but when it´s installed i use it as a normal user and
works ok.
I hope this can hep you.
Best Regards
Luis
|
|
Posted by Steve Ray on February 20, 2007, 1:09 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Firewall from within the IPSec client. V5.0 is in beta if you are able to
access this from CCO
Steve
> Hi,
>
> I am currently trying to install the latest vpn client from cisco on vista
> (R 5.0.00.0090-k9-beta), but I get an error during install
> of the deterministic network enhancer:
> InstallDNE
> Error: Dneinst execution error while installing DNE,
> returncode -2146500093
>
> The installer hereafter does a roll back on the installation.
>
> I am not using the MSI installer. I run as Administrator. I also tried R
> 4.8.02.0010-k9 with same problem.
>
> Any ideas ?
>
> Best regards
>
> Brian
Hi Brian,
I´m currently working with the versión 4.8.02.0010 (installed from the
msi). And work perfectly. During the installation i run it as
Administrator but when it´s installed i use it as a normal user and
works ok.
I hope this can hep you.
Best Regards
Luis
|
|
Posted by Brian Johansen on February 20, 2007, 5:08 pm
If you were Registered and logged in, you could reply and use other advanced thread options
the MSI installation succeeds !
The installation then wants to reboot, I chose not to reboot and was able to
start the vpn client and connect succesfully.
But after rebooting, vista automatically removes all start menu cisco
entries.
The installation folder still exist, but the vpn executable is not to be
found.
Why ? is vista uninstalling the application ?
regards
Brian
> Hi,
>
> I am currently trying to install the latest vpn client from cisco on vista
> (R 5.0.00.0090-k9-beta), but I get an error during install
> of the deterministic network enhancer:
> InstallDNE
> Error: Dneinst execution error while installing DNE,
> returncode -2146500093
>
> The installer hereafter does a roll back on the installation.
>
> I am not using the MSI installer. I run as Administrator. I also tried R
> 4.8.02.0010-k9 with same problem.
>
> Any ideas ?
>
> Best regards
>
> Brian
|
| Similar Threads | Posted | | Nortel Contivity VPN client & Windows Vista | September 18, 2006, 10:11 am |
| Old PIX 6.35 and Vista -64 bit ? | May 7, 2008, 7:18 am |
| Vista PPTP | February 11, 2007, 4:46 pm |
| Windows Vista | February 13, 2007, 2:03 pm |
| Cisco VPN and Vista ??? | September 19, 2007, 11:54 pm |
| Cisco LEAP on Windows Vista | November 3, 2006, 7:08 pm |
| Re: Has any one found a Vista replacment for Hyperterminal?? | April 12, 2007, 6:24 pm |
| Has any one found a Vista replacment for Hyperterminal?? | April 12, 2007, 6:07 pm |
| Cisco Agent Desktop (CAD) - Unable to use Voice Monitor on Windows Vista | April 7, 2008, 12:30 pm |
| WE ARE BUYING SOFTWARE - WINDOWS VISTA, XP PRO, WIN2K PRO, HOME, 98SE, 98, 95, NT 4.0, OFFICE, SERVER INCLUDES MICROSOFT, DELL, COMPAQ, IBM, HP OR ANY OTHER OEM PACKAGES as well as Retail Box or just media kits. | June 9, 2007, 6:08 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map