|
Posted by jego on June 25, 2007, 11:04 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I have a Cisco 1760V IOS 12.4 router with the voice configuration below.
Voice ports 2/0 and 2/1 are FXO ports connected to the PSTN.
Currently I have no problems dialing from a VOIP Phone 9-<The phone number>
to get an outside line on port 2/0 and 9-<The phone number> to get an
outside line on 2/1.
I have a VOIP PBX (Windows based) sitting next to this router and I assigned
this router the extension number 5000. What I want to be able to do is when
I dial 1-<Phone #>, the router will dial the extension on the PBX. On the
PBX's configuration interface I do see that the router has registered itself
as extension 5000, however when I dial for example 1197, where 197 is the
extension on the PBX, I get a NOT FOUND. What am I missing here?
Any help appreciated!
VOICE CONFIGURATION
============================
voice-port 2/0
ring number 10
cptone CA
caller-id enable
!
voice-port 2/1
ring number 10
cptone CA
caller-id enable
!
!
dial-peer voice 1 pots
destination-pattern 9.T
port 2/0
!
dial-peer voice 2 pots
destination-pattern 8.T
port 2/1
!
dial-peer voice 20 voip
service session
destination-pattern 1.T
session protocol sipv2
session target ipv4:10.33.39.252
dtmf-relay sip-notify
codec g711alaw
clid network-number 5000
!
sip-ua
authentication username 5000 password 13151601181B0B382F
nat symmetric check-media-src
retry register 10
registrar ipv4:10.33.39.252 expires 3600
sip-server ipv4:10.33.39.252
!
!
telephony-service
max-dn 4
max-conferences 4 gain -6
!
!
ephone-dn 1
number 5000
!
DEBUG (debug voip ccapi inout)
==================================
*Dec 8 17:44:07.221: //278/xxxxxxxxxxxx/CCAPI/cc_api_caps_ind:
Call Entry Is Not Found
*Dec 8 17:44:07.221: //-1/8985F2EA8349/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=206
----- ccCallInfo IE subfields -----
cisco-ani=206
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=1197
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=0
cisco-rdnsi=0
cisco-redirectreason=-1
*Dec 8 17:44:07.225: //-1/8985F2EA8349/CCAPI/cc_api_call_setup_ind_common:
Interface=0x840DFF88, Call Info(
Calling Number=206(TON=Unknown, NPI=Unknown, Screening=Not Screened,
Presenta
tion=Allowed),
Called Number=1197(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=Unknown,
FinalDestinationFlag=T
RUE,
Incoming Dial-peer=0, Progress Indication=NULL(0), Calling IE
Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID
Transparent=FALS
E), Call Id=278
*Dec 8 17:44:07.225: //278/8985F2EA8349/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=206(TON=Unknown, NPI=Unknown, Screening=Not
Screened
, Presentation=Allowed),
Called Number=1197(TON=Unknown, NPI=Unknown))
*Dec 8 17:44:07.233: //278/8985F2EA8349/CCAPI/cc_process_call_setup_ind:
Event=0x84343B20
*Dec 8 17:44:07.241: //278/8985F2EA8349/CCAPI/ccCallSetContext:
Context=0x8368F5AC
*Dec 8 17:44:07.241: //278/8985F2EA8349/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 278 with tag 0 to app "_ManagedAppProcess_Default"
*Dec 8 17:44:07.245: //278/8985F2EA8349/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
*Dec 8 17:44:07.253: //278/8985F2EA8349/CCAPI/ccCallDisconnect:
Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0,
Disconnect Ca
use=0)
*Dec 8 17:44:07.253: //278/8985F2EA8349/CCAPI/ccCallDisconnect:
Cause Value=3, Call Entry(Responsed=TRUE, Cause Value=3)
*Dec 8 17:44:07.269: //278/8985F2EA8349/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x840DFF88, Tag=0x0, Call Id=278,
Call Entry(Disconnect Cause=3, Voice Class Cause Code=0, Retry Count=0)
*Dec 8 17:44:07.269: //278/8985F2EA8349/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
|
| Similar Threads | Posted | | US Provider willing to Peer | May 31, 2005, 8:58 pm |
| testing dial up modem over VoIP | December 3, 2004, 3:21 pm |
| VoIP provider with dial in number in the US w/o monthly fee | May 9, 2005, 7:03 pm |
| FWD for dial-up | February 18, 2005, 5:43 pm |
| When You Dial 911, Can Help Find You? | May 12, 2005, 7:16 am |
| Economical Dial-out Service for US? | February 6, 2005, 6:16 pm |
| Vonage no dial tone | February 21, 2005, 9:08 am |
| Set speed dial on ATA 186 without any CallManager... | April 27, 2005, 5:18 am |
| Gafachi, no dial tone | May 23, 2005, 10:16 pm |
| Lifeline port to dial 911 with # afterwards ("911#")? | January 7, 2006, 6:21 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map