Trunking on 2611 ? ? ?

Trunking on 2611 ? ? ?
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 alt.certification.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Trunking on 2611 ? ? ? towli 02-04-2008
Posted by towli on February 4, 2008, 2:41 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi all

I can see the topic has been brought up below, however i do not find any
conclusions in the discussion:

Studying for my CCNA, i would very much like being able to make a "Router on
a stick" for the purpose of routing between Vlans.
I have searched the IOS download at Cisco.com to the point of getting
insane, but i can not seem to find any version that fits my 2611 with 8 mb
flash and 32 mb ram.

Can 802.1q trunking be done on this config? If so - what (downloadable) IOS
should i use?

My current (and not trunk-able) config is below:


I would really apreciate any help!

Best rgds

/Towli - Denmark




2600-50#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.3(24a), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 18-Dec-07 19:01 by stshen
Image text-base: 0x80008098, data-base: 0x80CF00A4

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

2600-50 uptime is 25 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.123-24a.bin"

cisco 2621 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of
memory.
Processor board ID JAD043108IZ (2932815247)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102
--More--  
2600-50#



Posted by towli on February 4, 2008, 3:05 pm
Sorry - its a 2621...
(this does not change my request though)

/T

> Hi all
>
> I can see the topic has been brought up below, however i do not find any
> conclusions in the discussion:
>
> Studying for my CCNA, i would very much like being able to make a "Router
> on a stick" for the purpose of routing between Vlans.
> I have searched the IOS download at Cisco.com to the point of getting
> insane, but i can not seem to find any version that fits my 2611 with 8 mb
> flash and 32 mb ram.
>
> Can 802.1q trunking be done on this config? If so - what (downloadable)
> IOS should i use?
>
> My current (and not trunk-able) config is below:
>
>
> I would really apreciate any help!
>
> Best rgds
>
> /Towli - Denmark
>
>
>
>
> 2600-50#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-I-M), Version 12.3(24a), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Tue 18-Dec-07 19:01 by stshen
> Image text-base: 0x80008098, data-base: 0x80CF00A4
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> 2600-50 uptime is 25 minutes
> System returned to ROM by power-on
> System image file is "flash:c2600-i-mz.123-24a.bin"
>
> cisco 2621 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of
> memory.
> Processor board ID JAD043108IZ (2932815247)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
> --More--  
> 2600-50#
>



Posted by Johann Lo on February 8, 2008, 7:41 am
I recall something about a C2650XM being the minimum model capable of dot1q
trunking (it was either that or some other critical feature in modern
environment). So you're highly likely to be ---- out of luck mate

towli wrote:

> Hi all
>
> I can see the topic has been brought up below, however i do not find any
> conclusions in the discussion:
>
> Studying for my CCNA, i would very much like being able to make a "Router
> on a stick" for the purpose of routing between Vlans.
> I have searched the IOS download at Cisco.com to the point of getting
> insane, but i can not seem to find any version that fits my 2611 with 8 mb
> flash and 32 mb ram.
>
> Can 802.1q trunking be done on this config? If so - what (downloadable)
> IOS should i use?
>
> My current (and not trunk-able) config is below:
>
>
> I would really apreciate any help!
>
> Best rgds
>
> /Towli - Denmark
>
>
>
>
> 2600-50#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-I-M), Version 12.3(24a), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Tue 18-Dec-07 19:01 by stshen
> Image text-base: 0x80008098, data-base: 0x80CF00A4
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> 2600-50 uptime is 25 minutes
> System returned to ROM by power-on
> System image file is "flash:c2600-i-mz.123-24a.bin"
>
> cisco 2621 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of
> memory.
> Processor board ID JAD043108IZ (2932815247)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
> --More--  
> 2600-50#


Posted by towli on February 7, 2008, 11:03 am
"borrowed" a 16Mb flash ram from a catlyst switch and 32 ram from another
2600.
Now im up and running on ROAST :)

/T

>I recall something about a C2650XM being the minimum model capable of dot1q
> trunking (it was either that or some other critical feature in modern
> environment). So you're highly likely to be ---- out of luck mate
>
> towli wrote:
>
>> Hi all
>>
>> I can see the topic has been brought up below, however i do not find any
>> conclusions in the discussion:
>>
>> Studying for my CCNA, i would very much like being able to make a "Router
>> on a stick" for the purpose of routing between Vlans.
>> I have searched the IOS download at Cisco.com to the point of getting
>> insane, but i can not seem to find any version that fits my 2611 with 8
>> mb
>> flash and 32 mb ram.
>>
>> Can 802.1q trunking be done on this config? If so - what (downloadable)
>> IOS should i use?
>>
>> My current (and not trunk-able) config is below:
>>
>>
>> I would really apreciate any help!
>>
>> Best rgds
>>
>> /Towli - Denmark
>>
>>
>>
>>
>> 2600-50#sh ver
>> Cisco Internetwork Operating System Software
>> IOS (tm) C2600 Software (C2600-I-M), Version 12.3(24a), RELEASE SOFTWARE
>> (fc1)
>> Copyright (c) 1986-2007 by cisco Systems, Inc.
>> Compiled Tue 18-Dec-07 19:01 by stshen
>> Image text-base: 0x80008098, data-base: 0x80CF00A4
>>
>> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>>
>> 2600-50 uptime is 25 minutes
>> System returned to ROM by power-on
>> System image file is "flash:c2600-i-mz.123-24a.bin"
>>
>> cisco 2621 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of
>> memory.
>> Processor board ID JAD043108IZ (2932815247)
>> M860 processor: part number 0, mask 49
>> Bridging software.
>> X.25 software, Version 3.0.0.
>> 2 FastEthernet/IEEE 802.3 interface(s)
>> 32K bytes of non-volatile configuration memory.
>> 8192K bytes of processor board System flash (Read/Write)
>>
>> Configuration register is 0x2102
>> --More--  
>> 2600-50#
>



Similar ThreadsPosted
VLAN Trunking & VTP February 20, 2005, 11:54 pm
Trunking - what am I doing wrong?????? February 28, 2005, 12:16 pm
VLANS trunking June 14, 2006, 9:41 am
Trunking question October 19, 2006, 9:10 am
Trunking question September 14, 2007, 5:10 pm
Trunking between a 3550 and a 5000 May 30, 2005, 3:32 pm
upgrade 2611 IOS Help December 12, 2005, 3:31 pm
2611 any good ? January 2, 2007, 11:59 am
VLAN trunking password domain? November 7, 2006, 3:59 pm
Inter Switch Link (ISL) 2611 Help! January 9, 2006, 8:49 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map