|
Posted by Rich Piehl on August 24, 2007, 5:43 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Thundercleets wrote:
> On Aug 23, 11:40 pm, Rich Piehl
>> Thundercleetswrote:
>>> Hi,
>>> Looking to setup a trunk transfer between a Samsung 400 and 500 where
>>> the 400 phone will have a truck transfer button on a phone attached to
>>> the 400 to connect to the 500 phone system. This will hopefully be
>>> able to transfer an outside or intercom call to phones on the 500. If
>>> it's needed a second trunk transfer button can be configured on the
>>> 400 attached phone to transfer intercom calls the 500.
>>> Thanks in advance,
>>> tmt
>> But what method are you connecting the two systems together? E&M?
>> Single line to trunk? OPX? Centrex?
>>
>> Take care,
>> Rich
>>
>> God bless the USA
>>
>> --
>> And if I claim to be a wise man
>> it surely means that I don't know.
>>
>> --Kansas
>
> Hi Rich,
>
> Thanks for the reply.
> The two systems will be talking with a single line to trunk.
>
> Regards,
> TMT
>
Set the ringing of the trunk on the 500 to route to the desired station
and program a DSS key for the DN of the single line port on the 400 phones.
Take care,
Rich
God bless the USA
--
And if I claim to be a wise man
it surely means that I don't know.
--Kansas
|