|
Posted by on June 12, 2008, 5:05 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I have a link and traffic from USA enters the network via this link
(together with traffic from Europe). Traffic from USA is marked with
precedence 2. I want to throttle certain IP ranges to only use a
certain amount of traffic that comes in with precedence 2, but am
encountering problems.
This is the config I have so far
class-map match-all precedence2
match ip precedence 2
class-map match-all client-128-int
match ip precedence 2
match access-group 110
!
policy-map international
class precedence2
set ip precedence 2
class client-128-int
shape average 128000
class class-default
set ip precedence 0
on interface s0/2 I try to activate it as follows
service-policy input international.
The policy does not seem to activate, when I issue sh run and look at
the configs of int s0/2 I dont see the service policy. When I remove
"class-map match-all client-128-int
match ip precedence 2" from the service policy and re-apply to int
s0/2 I can see it in the config and sh policy-map int s0/2 also
returns results.
Am I doing something wrong?
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map