|
Posted by Scooby on October 1, 2005, 1:55 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> On 1 Oct 2005 05:14:05 -0700, GS wrote:
> > I called one available ISP for Internet connection, they says "they
> > will give a ethernet (cat5) cable to home, that can be connected to
> > windows PC with static IP address (actually that guy comes home and
> > configures static IP addr in PC), also this is private IP addr
> > (something like 92.168.1.220), but he says it is only for one PC, if I
> > want one more PC for internet, then I have to take one more connection
> > from ISP for other PC. I asked him about SOHO Router, if I put one
> > router at home and WAN port connected to the cable coming from outside
> > (static private IP addr) and then I can connect both PC's to routers,
> > he says he can't do that, looklike he don't know much.
>
> He is not allowed to do that, which is quite different from
> _does not know how_.
>
> My installer would not touch the keyboard because the OS was Win 95
> instead of win 98. I had to do the typing.
>
> > Can I do that?.
>
> A router should work unless the ISP registers the MAC address of your
> pc. If so you would need a router which allows you to set the WAN MAC
> address. After installer left, I installed a second nic, booted linux,
> and the pc became the firewall/router for my lan.
>
> > Will it work?,
>
> It should.
>
> > if I connect staic IP addr to WAN port side and allPC's
> > to LAN side, but I don't know which private addresses are using on LAN
> > side by Router?.
>
> Router may have a default, or you can set the addresses via the web
> page interface of the router.
>
> > If Router uses teh same private IP address
> > (192.168.1.xx), will it be a problem, then do I have to change the
> > subnet to 192.168.34.xx or something like that?.
>
> The LAN net should be different from the WAN net group.
>
> > Can somebody confirm me whether I can do that?. Thanks in advance.
>
> I think you can. Actual events/procedures will depend on what router,
> not a hub, you buy.
>
These comments are correct. You always can do this, even if you have to
spoof the mac on the router. You may want to see if you can appeal to them
by saying you want the router in there for the firewall protection. They'll
probably come back with an argument that you can use a software firewall.
But, this is at least a chance to argue with them and see if they might
allow it.
Personally, I wouldn't let one of those guys touch my pc. Whenever I've had
the broadband guys come out, I tell them leave the parts, test the
connection and I'll do the rest.
Just MHO,
Jim
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map