|
Posted by Rich Piehl on December 16, 2006, 8:47 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Terry wrote:
>
>>Terry wrote:
>>
>>>Is it possible to have caller ID with this system ? Have not had a chance
>>>to check deeply in to this yet.
>>>
>>
>>It's been a while since I looked at it, but I think you can.
>>
>>Best recollection is that it requires a card installed in the cabinet and
>>the co lines half tapped into the card. And I think there were a couple
>>of programming changes, too.
>>
>>On a DK 16 the trick may be coming up with the card. That system has been
>>out of production for 8 or 10 years.
>>
>>Take care,
>>Rich
>>
>>God bless the USA
>>
>>--
>>Freedom requires work and sacrifice. Tyranny you can have by doing
>>nothing.
>>
>>Author unknown
>
> Thanks. I remember this one was done on Comdial systems. However I pulled up
> the manual for the DK-16 (1993), and there is no mention of any such device.
> The guy wants to add voice mail and caller ID and keep his old system. Looks
> like he can't get all he wants.
>
> TerryS
>
>
You are correct.
I happen to have a copy of the DK16e/40/280/424 manual on my hard drive
here at home. I started looking for the CID card for those models (TCIU
or RCIU)and found a list of cards for the DK 16. There is indeed no
mention of a CID card for the DK16.
Take care,
Rich
God bless the USA
--
Freedom requires work and sacrifice. Tyranny you can have by doing nothing.
Author unknown
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map