|
Posted by Capitan Mutanda on September 29, 2006, 10:55 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I'm working on a merger project and on one side there are quite old
boxes like 2924XL and 3640 with ancient firwmare. Tried contacting
local Cisco dealers to find how I can get support (smartnet I think)
for these devices, but always ended listening to a sales blurb for new
equipement that is NOT the option. Didn't find much info even on cisco
web site.
Any suggestions?
/CM
|
|
Posted by www.BradReese.Com on September 29, 2006, 12:02 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Hi CM,
Yes, Cisco SMARTnet is available for your 2924XL and 3640 units.
Cisco SMARTnet Pricing
http://www.bradreese.com/cisco-smartnet.htm
Sincerely,
Brad Reese
BradReese.Com - Cisco Repair
http://www.bradreese.com/cisco-big-iron-repair.htm
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
USA & Canada: 877-549-2680
International: 828-277-7272
Fax: 775-254-3558
AIM: R2MGrant
BradReese.Com - Cisco Power Supply Headquarters
http://www.bradreese.com/cisco-power-supply-inventory.htm
|
|
Posted by baydat on September 29, 2006, 5:03 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Capitan Mutanda wrote:
> Hi,
>
> I'm working on a merger project and on one side there are quite old
> boxes like 2924XL and 3640 with ancient firwmare. Tried contacting
> local Cisco dealers to find how I can get support (smartnet I think)
> for these devices, but always ended listening to a sales blurb for new
> equipement that is NOT the option. Didn't find much info even on cisco
> web site.
>
> Any suggestions?
>
> /CM
get smartnet or get spares for the antiques on the used market
|
|
Posted by Doug McIntyre on September 29, 2006, 6:57 pm
If you were Registered and logged in, you could reply and use other advanced thread options >I'm working on a merger project and on one side there are quite old
>boxes like 2924XL and 3640 with ancient firwmare. Tried contacting
>local Cisco dealers to find how I can get support (smartnet I think)
>for these devices, but always ended listening to a sales blurb for new
>equipement that is NOT the option. Didn't find much info even on cisco
>web site.
The 2924xl has been EOS for almost 5 years. It rolls off being able to
even be supported next month.
Thats most likely one reason the sales guys are selling you on new
hardware.
For the $160 cost of Smartnet, you could probably buy two boxes on
eBay for replacing them. Since its been EOS for so long, its not like
they are updating the code at all in them at all.
The 3640 hasn't quite reached EOS until next Spring IIRC. We've
already started seeing new hardware support lacking in the 3640. Its
not too long until it too is unsupportable.
|
|
Posted by Andrei Ivanov on September 29, 2006, 6:58 pm
If you were Registered and logged in, you could reply and use other advanced thread options > I'm working on a merger project and on one side there are quite old
> boxes like 2924XL and 3640 with ancient firwmare. Tried contacting
> local Cisco dealers to find how I can get support (smartnet I think)
> for these devices, but always ended listening to a sales blurb for new
> equipement that is NOT the option.
One of my 3524XL switches is covered with smartnet contract, but
it will end in July(?) 2007, and can't be extended after that. I
was told that after that date 3500XL switches won't be supported.
I think that 2900XL switches won't be supported either.
--
andrei
|
| Similar Threads | Posted | | SmartNet Help | November 24, 2004, 12:50 am |
| smartnet | January 24, 2006, 3:58 am |
| Smartnet | September 9, 2006, 11:13 am |
| Smartnet | April 17, 2008, 3:22 am |
| Smartnet renewal? | August 22, 2004, 12:28 pm |
| Smartnet - should we purchase? | December 9, 2004, 1:30 pm |
| Smartnet support | April 14, 2005, 9:08 am |
| Smartnet registration | June 27, 2005, 8:51 pm |
| SMARTnet contract. | December 23, 2005, 6:30 am |
| cisco smartnet | June 9, 2006, 12:52 pm |
|
|