|
Posted by on January 7, 2005, 4:00 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I currently have an IP-based satellite network (hub and spoke) with 16
remote sites. At each site I would like to add 2 IP phones. At the hub
site, I would like to interface a PBX via an E1 connection to a Cisco
2600 series router via the NM-HDV-1E1 module. The router would then run
Call Manager Express to manage the IP phones. The router would also
route calls from the E1 PBX to the IP phones.
Does this seem like a reasonable solution?
TIA for your response,
Aaron
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map