|
Posted by Fred Marshall on November 21, 2007, 10:28 am
If you were Registered and logged in, you could reply and use other advanced thread options
I'm working on a site-to-site VPN with an SSG-5 (for the first time with
this product line). I have a VPN set up with an RV042. The RV042 says the
VPN is "connected".
I'm wondering how the SSG-5 reports the same kind of status?
On the Home page the Interface link status doesn't show the VPN or the
tunnel.
Clicking on More shows tunnel.1 as "down" - which is the only tunnel that's
set up.
On the "most recent alarms" the one VPN is showing up for 90 seconds then
down for 30 seconds - repeatedly. The Linksys remains "connected" when the
alarm on the SSG-5 reports "down".
Thus, I'm confused by the apparent conflict in displays.
Any suggestions, hints appreciated.
Fred
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map