SPA-3000 Silent in PSTN Calls

SPA-3000 Silent in PSTN Calls
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.voice-over-ip  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
SPA-3000 Silent in PSTN Calls sergeroz 05-12-2005
Posted by on May 12, 2005, 9:01 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi,

I've got a strange problem with my Sipura SPA-3000. I can make VoIP
calls without problems, but when I dial a number that is supposed to go
through @gw0 (PSTN line), I cannot hear anything and cannot be heard by
the callee. The phone basically goes silent for all PSTN calls. (In all
cases, I am dialing using an analogue phone connected to SPA-3000's
FXS)

Can anyone suggest why this happens and how it can be fixed?

Thanks a lot,


Serge



Posted by Vox Humana on May 12, 2005, 8:23 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

> Hi,
>
> I've got a strange problem with my Sipura SPA-3000. I can make VoIP
> calls without problems, but when I dial a number that is supposed to go
> through @gw0 (PSTN line), I cannot hear anything and cannot be heard by
> the callee. The phone basically goes silent for all PSTN calls. (In all
> cases, I am dialing using an analogue phone connected to SPA-3000's
> FXS)
>
> Can anyone suggest why this happens and how it can be fixed?
>


What does your VOIP provider have to say about this?




Posted by Miguel Cruz on May 13, 2005, 1:27 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
>> I've got a strange problem with my Sipura SPA-3000. I can make VoIP
>> calls without problems, but when I dial a number that is supposed to go
>> through @gw0 (PSTN line), I cannot hear anything and cannot be heard by
>> the callee. The phone basically goes silent for all PSTN calls. (In all
>> cases, I am dialing using an analogue phone connected to SPA-3000's
>> FXS)
>>
>> Can anyone suggest why this happens and how it can be fixed?
>
> What does your VOIP provider have to say about this?

What would they have to do with it?

miguel
--
Hit The Road! Photos from 36 countries on 5 continents: http://travel.u.nu
Latest photos: Queens Day in Amsterdam; the Grand Canyon; Amman, Jordan


Posted by mazza on May 13, 2005, 2:41 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi,

I'm testing two sipura 3000, and I have the same problem when I connect
the SIpura with a PBX if I connect with a PSTN line all go in the
right way. But how do you do to connect to the PSTN line?

Thank you .

Cristian



Similar ThreadsPosted
Linksys SPA3000 July 2, 2006, 9:49 am
ISDN Wont Accept and Transfer PSTN Calls To CCM "bad bearercap" (AS5350-CCM) January 28, 2005, 12:32 pm
VOIP to PSTN April 14, 2004, 1:05 am
ATA with PSTN backup May 17, 2004, 2:31 pm
IP/PSTN interoperabilty July 13, 2004, 3:01 pm
Voip to PSTN February 21, 2006, 1:15 am
Consumer SIP/PSTN Gateway June 28, 2004, 11:24 am
best deal for UK outgoing PSTN? June 29, 2004, 3:41 pm
HOME VOIP-PSTN September 21, 2005, 12:15 pm
VOIP pstn adapter June 3, 2006, 10:17 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map