SNMP OIDs required for Cisco 1200 and Cisco 1100 series APs

SNMP OIDs required for Cisco 1200 and Cisco 1100 series APs

NewsGroups | Search | Tools
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
SNMP OIDs required for Cisco 1200 and Cisco 1100 series APs NYA 11-07-2006
Posted by NYA on November 7, 2006, 9:44 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hello

I have Cisco 1200 and 1100 APs at my facilty, I notice that in the WEB
UI of the APs, in the "Detailed Status" tab for each radio interface,
there are a group of statistics displayed (like receive stats, transmit
stats) for EACH suopported rate (like 36,54 mbps etc) allowed on that
radio. I need to query the same stats through SNMP/ or by any other
means available. But i am not getting the relevant OIDs which give the
statistics broken down for each rate supported by the radio. Can anyone
tell me the MIB/OIDs which can give me info per each rate supported by
that radio.

Currently I have the firmware c1200-k9w7-tar.12.3-7.JA2 on my Cisco
1200 AP. In case such a facility is supported by some other firmware
revision could you please suggest that firmware revision.

Thanks
NYA

PS: In case i have posted in the wrong forum, please let me know where
else i can get this information and have also looked on the object
navigator provided by Cisco on the web


Posted by Aaron Leonard on November 7, 2006, 6:05 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Use MIB Locator:

http://tools.cisco.com/ITDIT/MIBS/MainServlet

Aaron

---


~ Hello
~
~ I have Cisco 1200 and 1100 APs at my facilty, I notice that in the WEB
~ UI of the APs, in the "Detailed Status" tab for each radio interface,
~ there are a group of statistics displayed (like receive stats, transmit
~ stats) for EACH suopported rate (like 36,54 mbps etc) allowed on that
~ radio. I need to query the same stats through SNMP/ or by any other
~ means available. But i am not getting the relevant OIDs which give the
~ statistics broken down for each rate supported by the radio. Can anyone
~ tell me the MIB/OIDs which can give me info per each rate supported by
~ that radio.
~
~ Currently I have the firmware c1200-k9w7-tar.12.3-7.JA2 on my Cisco
~ 1200 AP. In case such a facility is supported by some other firmware
~ revision could you please suggest that firmware revision.
~
~ Thanks
~ NYA
~
~ PS: In case i have posted in the wrong forum, please let me know where
~ else i can get this information and have also looked on the object
~ navigator provided by Cisco on the web


Similar ThreadsPosted
Cisco 1200 / 1100 AP WPA and Pocket PC (PDA) August 31, 2005, 7:58 am
Cisco Aironet 1100 VLAN creation (over snmp) September 27, 2005, 4:23 pm
Cisco Aironet 1200 Series January 26, 2005, 12:21 am
Cisco 1200 Series :: Ethertype Filters July 21, 2004, 10:37 am
Help with backing up and restoring IOS on Cisco 1200 Series Access Points January 22, 2007, 12:02 pm
Intel Pro Wireless Cards cannot connect to Cisco 1200 series AP with new firmware June 7, 2005, 7:09 pm
ARP Caching on 1100/1200 AP August 20, 2004, 3:25 pm
Connect 1100 and 1200 ap as a bridge November 12, 2007, 12:14 am
Problems losing wifi connection 1100/1200 APs August 20, 2004, 3:23 pm
Aironet 1100 how to shut Radio Dot11 int via SNMP September 16, 2007, 9:17 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map