Routing remote office through web filter

Routing remote office through web filter
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Routing remote office through web filter Scott 06-03-2008
Posted by Scott on June 3, 2008, 12:28 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
I've got a Barracuda web filter for filtering web traffic. It sits
inline between the local network (172.30.17.0/24) and a Cisco 1841 off
of fa0/0. I've got the Barracuda tagging users through LDAP so it
needs to stay on the inside. fa0/1 is unused. s0/1/0 goes to the
internet. s0/0/0 goes to a remote office (172.29.3.0/24) across a
point-to-point connection.

I need traffic from the 172.29.3.0 network to go through the web
filter before going to the internet. Any suggestions?

NMFall 20%
Posted by artie lange on June 3, 2008, 12:33 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Scott wrote:
> I've got a Barracuda web filter for filtering web traffic. It sits
> inline between the local network (172.30.17.0/24) and a Cisco 1841 off
> of fa0/0. I've got the Barracuda tagging users through LDAP so it
> needs to stay on the inside. fa0/1 is unused. s0/1/0 goes to the
> internet. s0/0/0 goes to a remote office (172.29.3.0/24) across a
> point-to-point connection.
>
> I need traffic from the 172.29.3.0 network to go through the web
> filter before going to the internet. Any suggestions?


What kind of switch do you have? If it supports SPAN, then create a SPAN
port where all traffic from the fa0/0 gets copied to the port the
barracuda box sits on.

Posted by Wwieslaw on June 3, 2008, 1:12 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Scott wrote:
> I need traffic from the 172.29.3.0 network to go through the web
> filter before going to the internet. Any suggestions?

Run appliance in proxy mode (you will need to update browsers with proxy
settings and lock it - easy job if you're running windows domain)

Wieslaw

Similar ThreadsPosted
Remote Office Connectivity October 14, 2005, 9:55 am
Ethernet Wan - remote office January 29, 2006, 1:29 pm
VPN: Main Office ASA5510 to Remote 2811 w/ dual DSL January 25, 2006, 2:44 pm
Remote Access or Branch Office Solution Needed June 27, 2006, 3:04 pm
Assistance in troubleshooting CBAC for remote desktop access to office network October 4, 2006, 3:38 am
Routing for a satellite office September 20, 2007, 5:22 pm
Routing between office and datacentre using 3560 switches February 21, 2006, 12:22 pm
Adding vpn client to Cisco 506 PIX messes up office to office tunnel August 24, 2006, 2:59 pm
Remote access routing ? June 30, 2005, 2:34 pm
ASA 5510 Not routing remote vpn's to Internet July 24, 2006, 9:46 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map