|
Posted by Chavez on May 2, 2008, 1:48 pm
If you were Registered and logged in, you could reply and use other advanced thread options
>
>
> > I'm not sure if this is the correct group for this post, if not please
> > let me know. I have a DSL line from CenturyTel and have been assigned
> > 2 IP addresses. I have 2 routers a Trendnet and a PIX 501. The
> > connection is PPPoE and can authenicate using the Trendnet router for
> > the first IP of x.x.x.29. I need to assign the second IP of x.x.x.30
> > to the PIX. How do I pass the second IP to the PIX. NAT? Static?
>
> to answer your Q: Yes Static NAT - From the 3nd IP to the PIX outside IP.
>
> But why do you have the TrendNet router there at all ?
> Allthough I do not know of this router, i can assume that its about the
> interfaces, maybe DSL interface or likely.
> But if ouy can, you should consider using only the PIX Firewall, hence onl=
y
> one device to config and maintain and power etc.
>
> HTH
> Martin
Martin - thanks for the reply. I work for an oil company that also
owns and operates C-Stores. I had the network configured with the
Trendnet and was given the PIX by a vendor with instructions to
configure it with a public IP. Can I assign the PIX both IP's and
maybe V-LAN between the two networks?
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map