|
Posted by someone@somewhere on December 27, 2004, 1:57 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Hi all,
Configuring an 837 for DLS over analogue phone;
pc gets ip address from 837 dhcp server, pc can ping the router, on the
router i can ping internet hosts (both name and ip address) and ping the pc,
but when i ping from the pc to an internet host or ip address, it times out.
Anybody ?
TIA
|
|
Posted by on December 27, 2004, 5:47 am
If you were Registered and logged in, you could reply and use other advanced thread options
post you config without passwords
|
|
Posted by someone@somewhere on December 27, 2004, 2:58 pm
If you were Registered and logged in, you could reply and use other advanced thread options Current configuration : 1405 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname XXXXX
!
logging queue-limit 100
no logging console
enable secret XXXXX
!
username XXXXX password XXXXX
ip subnet-zero
ip name-server XXXXX
ip name-server XXXXX
ip dhcp excluded-address 192.168.5.1 192.168.5.20
!
ip dhcp pool 0
network 192.168.5.0 255.255.255.0
default-router 192.168.5.1
dns-server XXXXX XXXXX
!
!
ip audit notify log
ip audit po max-events 100
no ftp-server write-enable
!
!
!
!
!
!
!
interface Ethernet0
ip address 192.168.5.1 255.255.255.0
hold-queue
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
dsl enable-training-log
!
interface Dialer0
ip address negotiated
encapsulation ppp
dialer pool 1
ppp pap sent-username XXXXX password XXXXX
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
password XXXXX
login
no modem enable
stopbits 1
line aux 0
stopbits 1
line vty 0 4
exec-timeout 120 0
password XXXXX
login
!
no scheduler max-task-time
!
end
> Hi all,
> Configuring an 837 for DLS over analogue phone;
> pc gets ip address from 837 dhcp server, pc can ping the router, on the
> router i can ping internet hosts (both name and ip address) and ping the
pc,
> but when i ping from the pc to an internet host or ip address, it times
out.
> Anybody ?
> TIA
>
>
>
|
|
Posted by AM on December 27, 2004, 3:32 pm
If you were Registered and logged in, you could reply and use other advanced thread options someone@somewhere wrote:
> Current configuration : 1405 bytes
>
[CUT]
>
> pvc 0/35
>
Out of curiosity, which country do you live in to use this pvc parameters?
Alex.
|
|
Posted by Arnoud Helmantel on December 27, 2004, 6:45 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> someone@somewhere wrote:
> > Current configuration : 1405 bytes
> >
>
> [CUT]
>
> >
> > pvc 0/35
> >
>
> Out of curiosity, which country do you live in to use this pvc parameters?
>
> Alex.
BBNed in The Netherlands uses this for example. Same here on my 837.
And about the configuration: aren't you forgetting to enable NAT on
Ethernet0 and Dailer0?
Arnoud
--
Please use my first and last name in the address & remove '.invalid'
Mijn voor- en achternaam gebruiken in het adres zonder '.invalid'
|
| Similar Threads | Posted | | integrating new 3550 with routing into existing routing structure? | March 1, 2005, 8:06 am |
| intervlan routing and policy routing C3750 or C 4948 | October 20, 2005, 12:38 am |
| PIX routing help? | December 18, 2004, 8:10 am |
| IPX routing | February 28, 2005, 9:20 am |
| Routing PIX 515 6.3 | June 26, 2005, 11:38 am |
| IP Routing Help | June 27, 2005, 2:31 pm |
| VPN routing... | July 3, 2005, 8:17 pm |
| Pix VPN and routing | August 26, 2005, 2:26 pm |
| Again: Pix VPN & Routing | August 29, 2005, 4:27 pm |
| PIX "Routing.." | September 14, 2005, 7:38 am |
|
|