Routing based on destination IP address

Routing based on destination IP address
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Routing based on destination IP address daniele.lioi 11-13-2006
Posted by on November 13, 2006, 7:01 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi All,

I need to configure some static routes like this in order to implement
a work like load balancing :

route outside 155.195.65.23 255.255.255.255 IP_ROUTER_1
route outside 155.195.0.0 255.255.0.0 IP_ROUTER_2

Anyone know if is it works?

Thanks
Daniele


Posted by Brian V on November 13, 2006, 7:27 am
If you were  Registered and logged in, you could reply and use other advanced thread options

> Hi All,
>
> I need to configure some static routes like this in order to implement
> a work like load balancing :
>
> route outside 155.195.65.23 255.255.255.255 IP_ROUTER_1
> route outside 155.195.0.0 255.255.0.0 IP_ROUTER_2
>
> Anyone know if is it works?
>
> Thanks
> Daniele
>

Sure, of course. Simple routing. The difficult part is going to be your
source address on your ASA or Pix and routing back to it.



Posted by Charlie Root on November 13, 2006, 8:47 am
If you were  Registered and logged in, you could reply and use other advanced thread options
> Hi All,
>
> I need to configure some static routes like this in order to implement
> a work like load balancing :
>
> route outside 155.195.65.23 255.255.255.255 IP_ROUTER_1
> route outside 155.195.0.0 255.255.0.0 IP_ROUTER_2
>
This will not do any balancing because destinations are not the same. When
you want balance traffic, then both prefix and mask has to be the same, else
only best match will be used.

Cheers,
iLya



Similar ThreadsPosted
Policy routing based on destination port (layer4) January 11, 2006, 12:02 pm
route based on destination port August 18, 2005, 8:17 am
NAT source based on destination... per request? February 22, 2007, 3:23 pm
Let two objects point to the same destination/address April 1, 2008, 3:26 am
SCTP association startup(destination IP address ??) March 31, 2007, 5:42 am
outbound port 80 redirect to specific destination address February 28, 2008, 1:07 am
Static Routing + Destination IP range February 24, 2006, 2:20 pm
Blocking arp based on ip address? March 1, 2007, 6:59 pm
Nat translation/exemption decision based on source address September 15, 2005, 11:23 pm
Policy Based Routing April 6, 2005, 9:20 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map